Ableton Forum

I connected my FCB1010 to Live5 through Uno1x1 MIDI-USB interface, however when I press a pad nothing seems to come into Live's midi port (no led is blinking). I can see on my Uno1x1 leed linking though - that means FCB1010 is sending messages. Can someone help to figure out why Live5 is not seing it ?

Also, I search manual for midi chanell setup in Live5 and can't find it. Can someone explain me how would I set chanels in Live if I want i.e send midi messages from 4 diferent instruments on 4 diferent chanels ???

Art

come on, almost 30 views and no replies ? I thought there are plenty of people using FCB1010, and I beiliev I';m doing just something stupid to not to see it working. :oops: :oops: anyone can help, pls?

sorry mate can't help you...

i got the pedal today and am runnin it via a midsport 2x4 - live just picked ip up straight away...you sure you've got the right drivers installed for yer interface? might be worth checkin the manufacturers website just in case...

sorry i can't be more use


i got problems of my own with the beast...

You have the MIDI port set to input or remote in preferences?

If you wish to start clips and control effects with it the interface will need to
be enabled as a remote input.

-Ben

The other thing that I did was to set the pedals to trigger midi notes instead of the standard program changes that it is set up to send.
It's kind of an involved process, but in the manual it tells you what to do under 2.4.6 programming the NOTE function

aklisiewicz wrote:I connected my FCB1010 to Live5 through Uno1x1 MIDI-USB interface, however when I press a pad nothing seems to come into Live's midi port (no led is blinking). I can see on my Uno1x1 leed linking though - that means FCB1010 is sending messages. Can someone help to figure out why Live5 is not seing it ?

Also, I search manual for midi chanell setup in Live5 and can't find it. Can someone explain me how would I set chanels in Live if I want i.e send midi messages from 4 diferent instruments on 4 diferent chanels ???

Art

I have this same problem. I downloaded the 3rd party editor and change the configuration that way, but it doesn't seem to save the setting to the device, even though it says it does. I am going to try doing a factory reset next, but I was wondering if you found what was causing your problem. Thanks.

OriginalSpaceMan wrote:

aklisiewicz wrote:I connected my FCB1010 to Live5 through Uno1x1 MIDI-USB interface, however when I press a pad nothing seems to come into Live's midi port (no led is blinking). I can see on my Uno1x1 leed linking though - that means FCB1010 is sending messages. Can someone help to figure out why Live5 is not seing it ?

Also, I search manual for midi chanell setup in Live5 and can't find it. Can someone explain me how would I set chanels in Live if I want i.e send midi messages from 4 diferent instruments on 4 diferent chanels ???

Art

I have this same problem. I downloaded the 3rd party editor and change the configuration that way, but it doesn't seem to save the setting to the device, even though it says it does. I am going to try doing a factory reset next, but I was wondering if you found what was causing your problem. Thanks.

well, what i would do first is download something like midiox (veru useful), to show exactly what messages are getting sent in. make sure your uno is showing up and enabled for remote in live (as stated above). also the midi routing is on a per track basis, so you set the diff channels on each track.

the FCB is a beast to program, but i finally got mine all set up like it should be....

the FCB programming app is cool, but i think what it does is switch the programming of two pedals, stuff is saved (as long as you go through all the sys-ex, put the fcb in receive mode blah blah blah), but some of it is wrong. i gave up on it and just figured out how to program the midinotes into the pedal.

MrYellow wrote:You have the MIDI port set to input or remote in preferences?

If you wish to start clips and control effects with it the interface will need to
be enabled as a remote input.

-Ben

Agree with Ben, have you checked that?

Also you haven't said if you have programmed the FCB to send any particular messages yet........get hold of the FCB editor from the Yahoo FCB group, it is the only way to program the beast IMO.

Sometimes Live on the laptop I use for gigs doesn't recognise the FCB and I have to reboot to get it to see the FCB. Don't really understand why that is but......