Page 1 of 1
Daisy chaining MOTU 828 and Ultralite to use with Live
Posted: Wed Oct 03, 2007 7:50 am
by northernlight
Does this work?
I'm not at home to try this out, maybe one of you is running this configuration.
All the inputs on my 828 are used up, and i'm about to get some new gear. I've got an Ultralite laying around unused, so i wonder if this works with Live.
Posted: Wed Oct 03, 2007 10:08 am
by substance_g
I haven't tried it personally, but according to my Ultralite's instruction book it should work fine. You'll need to power them separately, not via the Firewire bus power.
Posted: Wed Oct 03, 2007 10:26 am
by northernlight
substance_g wrote:I haven't tried it personally, but according to my Ultralite's instruction book it should work fine. You'll need to power them separately, not via the Firewire bus power.
thanks.
i too am pretty sure that the two MOTU devices will work.
I'm not sure if Live can handle it.
Posted: Wed Oct 03, 2007 10:44 am
by substance_g
Ah, gotcha, ok. Won't it depend on your PC's ability to handle Live with all them inputs, rather than Live itself? What's your PC/Mac set up?
Posted: Wed Oct 03, 2007 10:48 am
by northernlight
substance_g wrote:Ah, gotcha, ok. Won't it depend on your PC's ability to handle Live with all them inputs, rather than Live itself? What's your PC/Mac set up?
MacBook Pro something, bought it a couple of months ago.
Posted: Wed Oct 03, 2007 11:05 am
by substance_g
MBP should be fine. I guess it's now over to any other folks here who have the same combination... (you could always just give it a go and see)
Posted: Wed Oct 03, 2007 11:26 am
by northernlight
substance_g wrote:MBP should be fine. I guess it's now over to any other folks here who have the same combination... (you could always just give it a go and see)
yeah, will give it a go tonight. just thought i would ask, maybe someone tried it before
Posted: Wed Oct 03, 2007 1:57 pm
by icedsushi
Yes, please report back and let us know if you can use all the inputs/outputs in Live at the same time.
If not, there's aggregate devices which apparently will do it, but I'm still not sure I understand how that works. I have heard you should be able to get 2 interfaces to work, even though you can only select one in Live's prefs.
Posted: Wed Oct 03, 2007 3:08 pm
by rbmonosylabik
icedsushi wrote:Yes, please report back and let us know if you can use all the inputs/outputs in Live at the same time.
If not, there's aggregate devices which apparently will do it, but I'm still not sure I understand how that works. I have heard you should be able to get 2 interfaces to work, even though you can only select one in Live's prefs.
It just adds the option to select a new audio I/O source called "Aggregate Device" or whatever you want to call it, with the total I/O of all the devices in it. The I/O numbering will depend on what order you add the soundcards to the Aggregate Device. For example, if you add one soundcard with 2 I/O and then another with 4, it will show as "Aggregate Device (6 ins/6 outs)" where I/O 1 and 2 will be the first soundcard and I/O 4 to 6 will be the 2nd.
Posted: Wed Oct 03, 2007 10:35 pm
by pixelmechanic
Hi
Don't know about 828, but was able to record/play all analogue outs and ins at same time on Ultralite and Traveler daisy chained via firewire and set up as aggregate device in OSX on Powerbook 1.67 with 1Gb... (was able to power both over single bus too, no psu required)
Was a bit of a hog though, well over 50% mark without any fx...
Shame ultralite doesn't have ADAT capability of other MOTUs.... I've heard it would run much faster if you simply routed ADAT outs of say 828 into Traveler (and inverse) rather than daisy chain by firewire...
Cheers
Jules