Ableton Forum

Hi!
I have a BCF2000 in Mackie mode. It worked perfect in Live 6.0.10. I can't get it to work in Live 7.0.1. I set it up exactly the same way I used to set it up in Live 6.0.10 but Live don't seems to send any data information to the BCF2000. I have to manually configure it thru Midi Map to get it to work.

Has anybody else got the BCF2000 (in Mackie mode) working in Live 7.0.1? Am I missing something?

Was working here, can't test at the moment.

But I had no problems with the bcf since very early in the betas...

It's working now.. thanks for your help.

input and output both need "remote" set to on

yeah mine was working perfect until live 7, I'm still trying to figure if its because of live or because my bcf itself is losing it

Willem, did you find any solution for your problem? When I move my BCF-faders for about 5 sec, I lose the connection with live. I can still use the sliders in live to control the BCF but not the other way around. I need to restart Live to get it up and running again.. strange..

yep,
it works for one 5min or less if you switch banks too much. Then it falls down and tou can't use it anymore unless you reboot it. I took another one ( a shiny white one) to see if it was the bcf itself but it isn't.
I checked my settings everything is ok.
Very strange.......woooooooooooo

Anyway, does anybody have a solution for this bullcrap?