Page 1 of 2
Kontrol49 and MicroKontrol vs PadKontrol mapping to drumrack
Posted: Sat Mar 08, 2008 8:33 pm
by timbreland
Do the 4x4 pads on the Kontrol 49 map to drum rack the same way the Padkontrol does; ie whatever pads are visible in the drum rack can be played on the drum pads?
Posted: Sat Mar 08, 2008 8:43 pm
by mja
Ive spend all day trying to map the pads on the kontrol 49,no luck though..I can map a couple of them but they just seem to map to random clips in the drum rack
and also when i move the drum rack up are down the clip that i have mapped doesnt move with it...
Posted: Sat Mar 08, 2008 9:15 pm
by BAKOY_MUSIC
same shit in these part of the woods too
Posted: Sat Mar 08, 2008 9:16 pm
by chrysalis33rpm
I've got the microkontrol working fine, make sure you get the in AND out ports set correctly both in the mackie control settings and down below.
I've got the automap control part set to in : port 2, out : port 3
Port 2 and three are both enabled for input but not output down below as well.
Hope that's not too confusing.
Posted: Sat Mar 08, 2008 9:16 pm
by timbreland
thats too bad. i guess my same question applies to the microkontrol as well, and does it run well in native mode with Live? ie; do the little screens display whatever parameter you're editing?
Posted: Sat Mar 08, 2008 9:22 pm
by timbreland
Posted: Sat Mar 08, 2008 9:27 pm
by BAKOY_MUSIC
Who's got their Kontrol 49 to work like it should, moving with the pads ?
Posted: Sat Mar 08, 2008 9:59 pm
by chrysalis33rpm
timbreland wrote:thats too bad. i guess my same question applies to the microkontrol as well, and does it run well in native mode with Live? ie; do the little screens display whatever parameter you're editing?
no, look for an app called LCXMU (Mac only) to do that via Mackie emulation.
Posted: Sat Mar 08, 2008 10:11 pm
by mja
I have actually yet to come across someone on here that has mapped their 16 pads on their knotrol 49 with the drum rack...without any problems..I think they ve made it very complicated to map the drum rack...I originally thought that it would be mapped like everything else..oh how i wish
Posted: Sat Mar 08, 2008 10:14 pm
by chrysalis33rpm
why on earth would it be any different than the microkontrol? they're 95% identical.
Posted: Sat Mar 08, 2008 10:17 pm
by Winterpark
download
this for MK users.
works fine.... you just have to get the settings correct.
Posted: Sun Mar 09, 2008 12:04 am
by BAKOY_MUSIC
Aah, the LCXMU , why have they got it right and not Abes or Korg ?
_________________Why do we have top spend 40 bux on something that should be right from the start ?
. . . we're gonna try the demo version !
Posted: Sun Mar 09, 2008 1:11 pm
by Winterpark
BAKOY_MUSIC wrote:Aah, the LCXMU , why have they got it right and not Abes or Korg ?
_________________Why do we have top spend 40 bux on something that should be right from the start ?
. . . we're gonna try the demo version !
you don't have to spend any money. it does work. you just have to get the settings right.
good luck with it.
Posted: Sun Mar 09, 2008 2:52 pm
by wolvicorn
The automatically mapping Drum Racks (for MicroKontrol and Kontrol49) work only on the NEWEST release of Live (7.02). So if you haven't already downloaded that, that should be your first step!
Posted: Mon Mar 10, 2008 10:15 am
by BAKOY_MUSIC
so you guys have kontrol 49 setup perfectly then ?,
you must be blessed,
we have 7.02, we read that it accomodates Kontrol 49,
we get most out of it, but it doesn't move with the pads, does yours then ?