Page 1 of 1
Anyone get BCR2000 toggle lights to match SOLO
Posted: Mon Aug 04, 2008 6:54 am
by nowtime
When I engage the toggle function on my BCR buttons controlling SOLO it behaves like a radio, requiring multiple presses. Unlike MUTE which works like a perfect toggle.
???????????????????????????
Posted: Mon Aug 04, 2008 7:41 am
by Johnisfaster
hm.. oddly enough I couldn't get mute to respond right, used to work and then something happened on an update and it didn't work anymore. tried all sorts of settings in the bcr and then gave up eventually.
maybe it works again...
Posted: Mon Aug 04, 2008 8:13 am
by nowtime
Ahhhh.
A bug perhaps. Will contact Ableton.
Posted: Mon Aug 04, 2008 8:16 am
by cram33
If i'm correct, the toggle function on my BCR is at off for the mute buttons. Toggle on indeed means you have to press twice for some functions. But I have to say that I use my BCF in Mackie emu mode now, wich works great for me.
Posted: Mon Aug 04, 2008 12:44 pm
by hoffman2k
Just change the button to toggle mode.
Press edit + the button you want to change, set it to toggle with the mode knob (6th on the top row) and press store twice.
Posted: Mon Aug 04, 2008 9:43 pm
by amoeba
hoffman2k wrote:Just change the button to toggle mode.
to clarify - there are two toggle modes on the BCR - ON and OFF. you need to use the OFF setting to get the results as required by the OP. unfortunately, i can't find a way to make the lights stay on using this mode, but this is also true for other controllers as well.
Posted: Mon Aug 04, 2008 10:07 pm
by hoffman2k
amoeba wrote:hoffman2k wrote:Just change the button to toggle mode.
to clarify - there are two toggle modes on the BCR - ON and OFF. you need to use the OFF setting to get the results as required by the OP. unfortunately, i can't find a way to make the lights stay on using this mode, but this is also true for other controllers as well.
An on/off setting still goes with 1 mode. Its either on or off.
The OP and you need to turn toggle mode on and need to make sure parameter feedback is enabled. (Remote Output to BCR enabled)
You also need to make sure the parameters in live are received as "Absolute" because sometimes they get accepted as "Relative signed bit".
Posted: Wed Aug 06, 2008 8:01 am
by nowtime
hoffman2k wrote:amoeba wrote:hoffman2k wrote:Just change the button to toggle mode.
to clarify - there are two toggle modes on the BCR - ON and OFF. you need to use the OFF setting to get the results as required by the OP. unfortunately, i can't find a way to make the lights stay on using this mode, but this is also true for other controllers as well.
An on/off setting still goes with 1 mode. Its either on or off.
The OP and you need to turn toggle mode on and need to make sure parameter feedback is enabled. (Remote Output to BCR enabled)
You also need to make sure the parameters in live are received as "Absolute" because sometimes they get accepted as "Relative signed bit".
Finally got a chance to respond...
Yours work that way? Mine do not work. As I stated above, using MUTE works fine. LED lit when Mute is engaged, off when un-muted. SOLO, using Absolute and Toggle on, requires 2 clicks to change hte status, thus my dilemma. I can't remember if Live 4 or 5 did this, but I need proper feedback now.
Anyone get correct feedback on solo?