Reactivate Automation

People Thought · Post by **People Thought** » Thu Apr 27, 2006 7:08 pm

If i change a value while its automating the automatin LED goes off and it no longer plays it. How do I reactivate automation?

stinky · Post by **stinky** » Thu Apr 27, 2006 7:51 pm

Click the Back to Arrangement button...

djadonis206 · Post by **djadonis206** » Thu Apr 27, 2006 8:08 pm

That works but I have a problem like this

say I've done a bunch of volume automation then I eralise the whole track needs to be turned down

I touch the fader and all automation goes grey - then I hit the red button and everything returns to the way it was before I turned the overall volume down

hmmmm

People Thought · Post by **People Thought** » Thu Apr 27, 2006 8:32 pm

Is there anyway to mute automations? This is what I was originaly trying to do.

stinky · Post by **stinky** » Thu Apr 27, 2006 8:52 pm

Create a dummy midi track... copy the entire envelope to the new midi track, and you should be able to do whatever you want to the original track, and copy and paste parts of the envelope back and forth, and still have a copy of the original envelope..

there's is no envelope mute... just lock envelope, which has no bearing on what you're trying to do.

forge · Post by **forge** » Thu Apr 27, 2006 10:22 pm

I have been pushing HARD for a seperate record button for automation - keep it seperate - I'm always wanting to record the sequence but not automation and vice versa

Another suggestion I've been pushing for is a modifier key to momentarily bypass record while you twaek - so for the problem Adonis just mentioned (which drives me crazy almost daily) you should be able to hold CTRL while you change the level and have it not recorded - even better would be another modifier as well so you could hold ALT while it's not recording and have it temporarily record JUST THAT parameter - so like a temp record button that just records the next thing you tweak

kennerb · Post by **kennerb** » Thu Apr 27, 2006 10:27 pm

forge wrote:I have been pushing HARD for a seperate record button for automation - keep it seperate - I'm always wanting to record the sequence but not automation and vice versa

Another suggestion I've been pushing for is a modifier key to momentarily bypass record while you twaek - so for the problem Adonis just mentioned (which drives me crazy almost daily) you should be able to hold CTRL while you change the level and have it not recorded - even better would be another modifier as well so you could hold ALT while it's not recording and have it temporarily record JUST THAT parameter - so like a temp record button that just records the next thing you tweak

Word

That's caused me to hurt my toes a couple of times.

The other thing that gets me is in arrange view.
there should be a select envelope only so if you hit the delete key it doesn't cut the clip behind it. It would be so cool to have it act like cel animation where you could erase or draw one layer without effecting the others.

forge · Post by **forge** » Thu Apr 27, 2006 10:43 pm

kennerb wrote:
forge wrote:I have been pushing HARD for a seperate record button for automation - keep it seperate - I'm always wanting to record the sequence but not automation and vice versa

Another suggestion I've been pushing for is a modifier key to momentarily bypass record while you twaek - so for the problem Adonis just mentioned (which drives me crazy almost daily) you should be able to hold CTRL while you change the level and have it not recorded - even better would be another modifier as well so you could hold ALT while it's not recording and have it temporarily record JUST THAT parameter - so like a temp record button that just records the next thing you tweak
Word

That's caused me to hurt my toes a couple of times.

The other thing that gets me is in arrange view.
there should be a select envelope only so if you hit the delete key it doesn't cut the clip behind it. It would be so cool to have it act like cel animation where you could erase or draw one layer without effecting the others.

I thought CTRL+ delete did that?

kennerb · Post by **kennerb** » Thu Apr 27, 2006 11:10 pm

forge wrote:
kennerb wrote:
forge wrote:I have been pushing HARD for a seperate record button for automation - keep it seperate - I'm always wanting to record the sequence but not automation and vice versa

Another suggestion I've been pushing for is a modifier key to momentarily bypass record while you twaek - so for the problem Adonis just mentioned (which drives me crazy almost daily) you should be able to hold CTRL while you change the level and have it not recorded - even better would be another modifier as well so you could hold ALT while it's not recording and have it temporarily record JUST THAT parameter - so like a temp record button that just records the next thing you tweak
Word

That's caused me to hurt my toes a couple of times.

The other thing that gets me is in arrange view.
there should be a select envelope only so if you hit the delete key it doesn't cut the clip behind it. It would be so cool to have it act like cel animation where you could erase or draw one layer without effecting the others.
I thought CTRL+ delete did that?

You could very well be right and it's one of the many things that I have overlooked in Live (yes I read the manual but I have ADD)

I blush

People Thought · Post by **People Thought** » Thu Apr 27, 2006 11:18 pm

So if I want the ability to bypass automation, then I'm using the wrong host? This seems like such a simple feature, and for a program designed for live use it seems almost essential to me.

forge · Post by **forge** » Fri Apr 28, 2006 12:42 am

kennerb wrote:
forge wrote:
kennerb wrote: Word

That's caused me to hurt my toes a couple of times.

The other thing that gets me is in arrange view.
there should be a select envelope only so if you hit the delete key it doesn't cut the clip behind it. It would be so cool to have it act like cel animation where you could erase or draw one layer without effecting the others.
I thought CTRL+ delete did that?
You could very well be right and it's one of the many things that I have overlooked in Live (yes I read the manual but I have ADD)

I blush

actually there seem to be lots of things missing from the manual - probably due for an overhaul!

longjohns · Post by **longjohns** » Fri Apr 28, 2006 1:03 am

just a couple other ideas for after the fact overall volume reduction:

clip gain, if it's all one clip

or

utility plugin with gain adjustment made there.

muthafunka · Post by **muthafunka** » Fri Apr 28, 2006 1:25 am

djadonis206 wrote: say I've done a bunch of volume automation then I eralise the whole track needs to be turned down

I touch the fader and all automation goes grey - then I hit the red button and everything returns to the way it was before I turned the overall volume down

Drag select the area of automation where you'd like to lower the overall volume, click, hold and drag up/down between automation nodes and you can change whole chunks of envelope in situ.
Or just route the channel's audio out to another audio track and tweak that fader.

nolus · Post by **nolus** » Fri Apr 28, 2006 6:54 am

individual "back to arrangement" buttons for each track in live 6 would make my day.