Ableton Forum

Bump, please ^^' Still having issues here and have a big gig coming on friday.

If nothing else I simply won't use the Kaoss Pad, but really would love to make it work correctly!

Yes I know.. however the idea was to be able to send out any loop I had going at any given time to the KP3, so I can use the built in FX to play with it while layering more loops on top of it.

I have my controller mapped to send audio from any desired channel into the KP3.

above that, i can't seem ...

Hello everybody, this is my second topic in the support center...

I have a Korg Kaoss KP3 external FX box/sampler connected to my soundcard and my midi controller is set up to send audio to it Via the EXTERNAL FX plugin.

My problem is that I've adjusted my latency to a high latency (I'm using a ...

In that case add the external effect to the track itself (1-Audio) and flip the switch on the back of the KP3 to direct. you will only be able to use the KP3 on that one track but all the signal running from 1-Audio will go to the KP3 and through the KP3. you can adjust the wet/dry on the KP3 using ...

In that case add the external effect to the track itself (1-Audio) and flip the switch on the back of the KP3 to direct. you will only be able to use the KP3 on that one track but all the signal running from 1-Audio will go to the KP3 and through the KP3. you can adjust the wet/dry on the KP3 using ...

@ Format -- The input volume is at almost 5% of the available 100% (It's very sensitive), any lower and the audio does not stream through properly, any higher and it vastly overpowers... so messing with this knob does not fix my problem =(


I could be wrong (and I'm not at my DAW at the moment ...

have you got the KP3 set to direct (insert) or return (send)... should have a switch on the back if it's set on direct the input signal will pass through unaffected which is why your getting a doubled signal at abletons master .. switch to return (i think thats what it's called ) and you will only ...

Sadly there isn't much to mess with on the KP3 that effects the input stream.

There is just the input gain, tempo control, FX release, etc.

The sound is distorted with no FX being played, which is my biggest problem.

I found a temporary work around, if I set up an EQ 8 on the track that is ...

That makes sense, but when I try to fix it it still sounds messed up.

Here is a screenshot of a test project with the same setup as my DJ set (That pic would be an eyesore to look at)

http://i42.tinypic.com/34e9f2b.png

Audio 1: Sends Only >
Return Track A: (External FX plugin: In and Out: 3/4 ...

Alright, so my latest problem here is that when I use an External FX device in ableton and route it into my Kaoss Pad, the audio sounds flattened, and the bass significantly increases.

I have set up the proper in's and out's with my soundcard, however when I route the audio into the KP3, the audio ...

thanks for the feedback!

i actually made it with headphones for the most part.

Since then I got some monitors and the quality from the tracks i've made since then sounds a lot better..

Hello everybody!

I have here on my soundcloud a recent track I have produced, as well as a mix I produced in 2009.
Was hoping to get some feedback Thanks if you have time!

http://soundcloud.com/azur3

ok thanks a lot :]

Cool I got confused for a bit cos I had to turn remote back on hehe. =]

I've been mapping it and messing around with it but I am not an experienced Midi mapper. I read through the built in lesson, But I still have 2 more questions off the top of my head...

1) Any idea how to make each column a ...

Omg.. I feel like a dummy.

This entire time I've thought I had the driver installed, I had actually downloaded the korg usb midi driver TOOLS... I actually had to open them and install the kp3 device.

Now I am getting a yellow blinking dot in ableton (Happy).

What's the next step? :]

Thank you ...