White noise from certain tracks

Discuss music production with Ableton Live.
Post Reply
sweetjesus
Posts: 8803
Joined: Wed Mar 31, 2004 3:12 pm
Location: www.fridge.net.au
Contact:

White noise from certain tracks

Post by sweetjesus » Sun May 01, 2005 12:18 pm

Hi there,

I have a strange problem..all my heavier projects tend to play white noise from one or two tracks. The noise follows the waveform of the track (which makes it even weirder). I have to reboot a couple of times for those projects to play properly. Changing the audio settings does nothing to help the matter.

Anyone else experience this?

jt_castillo
Posts: 20
Joined: Wed Apr 27, 2005 10:09 am
Location: miami beach

Post by jt_castillo » Sun May 01, 2005 2:02 pm

hey sweet,

i experience all sorts of wierdness in large projects, including what you are talking about, but it doesnt come out in my renderings, and it happens only every so often.

i also have a problem with clips getting wierd clicks in them on large projects, and i have to delete the clip and make a new one from scratch.

--jt

spiderprod
Posts: 1120
Joined: Wed Mar 31, 2004 10:11 pm

Post by spiderprod » Sun May 01, 2005 6:56 pm

is it an lfo noise? cos i sometimes get this noise with reaktor but once i play a key ,the noise goes so i use a gate on the output .

sweetjesus
Posts: 8803
Joined: Wed Mar 31, 2004 3:12 pm
Location: www.fridge.net.au
Contact:

Post by sweetjesus » Mon May 02, 2005 6:23 am

spiderprod wrote:is it an lfo noise? cos i sometimes get this noise with reaktor but once i play a key ,the noise goes so i use a gate on the output .
Nope I make everything by recording audio straight into Live.

The only thing I use close to softsynths are impule and simpler because I found Live had MAJOR issues with CPU cycles shooting over 100% when they were meant to be in fact 30% etc.. whenever I used softsynths...

so now this stuff is all pure hardware. I load almost everything into RAM and yeah get this crazy problem.

As I said the weirdest thing is the the fact that the noise follows the envelope of the sound that is meant to be playing in that track.

sweetjesus
Posts: 8803
Joined: Wed Mar 31, 2004 3:12 pm
Location: www.fridge.net.au
Contact:

Post by sweetjesus » Tue May 03, 2005 6:11 am

Bueller?

Pitch Black
Posts: 6722
Joined: Sat Dec 21, 2002 2:18 am
Location: New Zealand
Contact:

Post by Pitch Black » Tue May 03, 2005 7:02 am

I would wonder if a bad VST/AU is the cause. Can you pull 'em all out and see if it makes any difference?

I appreciate that you may be using all audio tracks, but in your position, thats the kind of voo... voo... voodoo technique I'd try, just to see if it makes any difference.

hth
MBP M1Max | Sonoma 14.7 | Live 12.1 | Babyface Pro FS | Push 3T | clump of controllers
Soundcloud
Ableton Certified Trainer

sweetjesus
Posts: 8803
Joined: Wed Mar 31, 2004 3:12 pm
Location: www.fridge.net.au
Contact:

Post by sweetjesus » Tue May 03, 2005 7:06 am

Pitch Black wrote:I would wonder if a bad VST/AU is the cause. Can you pull 'em all out and see if it makes any difference?

I appreciate that you may be using all audio tracks, but in your position, thats the kind of voo... voo... voodoo technique I'd try, just to see if it makes any difference.

hth
I am only using Lives internal fx... still reckon I should pull them out?

AdamJay
Posts: 4757
Joined: Thu Mar 11, 2004 7:17 pm
Location: Indianapolis, USA

Post by AdamJay » Tue May 03, 2005 7:07 am

its all that analogue gear yer using. :P

Pitch Black
Posts: 6722
Joined: Sat Dec 21, 2002 2:18 am
Location: New Zealand
Contact:

Post by Pitch Black » Tue May 03, 2005 7:29 am

sweetjesus wrote: I am only using Lives internal fx... still reckon I should pull them out?
Hi sweet, not to be pedantic, do you have any 3rd party plugins being scanned by Live on bootup even if you're not using 'em in your projects? I'd pull THEM out temporarily, just to eliminate that possibility. (my personal flail-in-the-darkness-suck-it-and-see technique :roll: )

'pologies if you've already tried this...

sweetjesus
Posts: 8803
Joined: Wed Mar 31, 2004 3:12 pm
Location: www.fridge.net.au
Contact:

Post by sweetjesus » Tue May 03, 2005 8:29 am

Pitch Black wrote:
sweetjesus wrote: I am only using Lives internal fx... still reckon I should pull them out?
Hi sweet, not to be pedantic, do you have any 3rd party plugins being scanned by Live on bootup even if you're not using 'em in your projects? I'd pull THEM out temporarily, just to eliminate that possibility. (my personal flail-in-the-darkness-suck-it-and-see technique :roll: )

'pologies if you've already tried this...
no need to be sorry, trying that now.. I will also pluck some chickens and make a pentagram out of their feathers and dance while the chicken impales itself on a toothpick in my own voodoo technique.

sweetjesus
Posts: 8803
Joined: Wed Mar 31, 2004 3:12 pm
Location: www.fridge.net.au
Contact:

Post by sweetjesus » Tue May 03, 2005 11:08 am

PitchBlacK:

Thank you my kiwi friend! Seems to have made a difference...

Lets us hope that the spirite of the white noise does not come back.

FYI, I only tried your suggestions, no chickens were harmed during the fixing of this problem.

Post Reply