aurex FREE step sequencers for LP without M4L/Bome ! + vids

[nestadog]

quick question how do you setup up sampledeck to work with two tracks?

[Sarrova-Q]

quick question how do you setup up sampledeck to work with two tracks?

Hi

You can just send multiple tracks to the Masher / Sampledeck by modifying the audio outs for the tracks you want to be affected.

- Select all the tracks (outside of the grouped Masher/SD track) you want to go to the Masher / SampleDeck
- Select "Subject" for the "Audio To"
- Set Monitor to "IN" for the Subject track.
- Enjoy

All the best
aurex

[nestadog]

Thanks, Guess I over did it, Already got the info from your email this week, but thanks again. Just finished mapping a new set that seems to be working out great. Kind of combining your program with tom cosm's megaset, and nativeKontrols presets. Giving me a lot of flexibility in my production and live performances. Thanks again!

[sho-A]

I want to use TROXIC 8-8 and 8-step V2 with two Launchpad, coz I have it two! is that possible to do that? coz I try many way but its get clash!
and these sequence can send output different channel? I just can send output 1-2

anyway your sequence is awesome!!!

[Guff Tong]

I've seen a few rumblings on the Facebook Aurex Page...more LP goodies to come soon I think!!

[sho-A]

sorry for my question again!

- Select all the tracks (outside of the grouped Masher/SD track) you want to go to the Masher / SampleDeck
- Select "Subject" for the "Audio To"
- Set Monitor to "IN" for the Subject track.

I can get signal to channel two but I can't control deck B,,,
How did you set it up??

[3phase]

this looka all very cool and i would like to give it a shot..but i found it impossible to download any of the devices.. they are not on your page and theese filshare service you seem to use is just mad with long waiting times and captchas it dont gets even when you type them wright. or file not exsits messages...
are the files so big? or is there an alternativ downloadlocation somewhere that isnt linked on your page?

[3phase]

this looka all very cool and i would like to give it a shot..but i found it impossible to download any of the devices.. they are not on your page and theese filshare service you seem to use is just mad with long waiting times and captchas it dont gets even when you type them wright. or file not exsits messages...
are the files so big? or is there an alternativ downloadlocation somewhere that isnt linked on your page?

Unless I'm missing something, you might wanna check here - http://www.aurexmusic.com/lpdownloads

The "Download" link there worked fine for me.

now its working :-/ looks like the same page where i ve been... anyway thnx..

i will see if theese give a reason to dont sell the lunchpad

in case they do i of cause will donate something.. looks like some serious development effort..

and if one wonders.. its the formfactor of the lunchpad..its to big for me to find a space for it in the studio or stage... its allways the piece of gear you have to discoinnect to acces more important things...
for an 8x8 matrix it defenetly has a yeti footprint.. actually its foot operatable..
never will understand why it was possible to waste so much material and space..its uneconomical...launch buttons dont really need to be bigger than the ones i write theese mail with...

[3phase]

i got the presets of native control thatr add usefull to a production situation..as theese sequencers might do aswell... but the stray stuff is more basic controls and composition tools... not so much stage related as theese aurex presets..
if i just would find the space to place the lunchpad.. it would be usefull..

I am really pissed that this is allmost as big as my laptop.. was really a shock when i opened the box..wouldnt have imagined it so big... probably had the immage of chinese hands when i ve seen the demo video for the LP.. but actually they had a viking to demonstrate it...

[Sarrova-Q]

MashDeck and JigSquare are finished and available on my site : http://aurexmusic.com/launchpad
http://www.youtube.com/watch?v=MFajsMga-o0

I'm now using my site's webspace so downloading should be trouble (and ad) free !

MashDeck is a combination of Masher and SampleDeck in 1 Launchpad.
JigSquare is a new app which I specially developed for my own live-sets. I think it's a bit more live orientated than the other apps and it let's you improvise and remix on the fly.
Check my other vids if you need more info about Masher and SampleDeck.

Hope you enjoy it! Also, big thanks to everyone who already made a donation!!!!
It's because of you I can make these apps.

As always, you can mail me in case of problems but be patient cause I'm doing this in my free time.

Cheers! rx

[Der_Makrophag]

Hi!

First of all: Great work! It is really fun playing around.

However I am experiencing a problem: My Launchpad seems to be too sllow, to keep up with the timing of the running lights in 8step (scene launch buttons) that show the current step. They are running not smoothly like in your vid. In addition it seems to be very slow when switching between session and user modes. Could this be a problem of Automap or another MIDIUSB device attached (I also have a M-Audio Radium49)?
Do you have any suggestions?

[Sarrova-Q]

Hi!

First of all: Great work! It is really fun playing around.

However I am experiencing a problem: My Launchpad seems to be too sllow, to keep up with the timing of the running lights in 8step (scene launch buttons) that show the current step. They are running not smoothly like in your vid. In addition it seems to be very slow when switching between session and user modes. Could this be a problem of Automap or another MIDIUSB device attached (I also have a M-Audio Radium49)?
Do you have any suggestions?

Hmm I couldn't re-create this behaviour so I'm not quite sure what is going on.
All my sequencers use simple note values to trigger the LED's via the Midi Out's on certain tracks.
My guess is that your midi connection is slowing down your midi data.
You could check this by sending midi notes via your midi out to a hardware synth if you have that.
Also, switching between session and user modes should really be very quick so there's definitely something wrong.
I'm sorry I can't give you a direct solution to your problem, it's hard because I can't recreate this from here and I can't check your setup :S

Is there someone else here who knows what's going on with Der_Makrophag's midi setup?

[Paradigm X]

ive still not had a chance to try any of these

[Der_Makrophag]

Hi!

First of all: Great work! It is really fun playing around.

However I am experiencing a problem: My Launchpad seems to be too sllow, to keep up with the timing of the running lights in 8step (scene launch buttons) that show the current step. They are running not smoothly like in your vid. In addition it seems to be very slow when switching between session and user modes. Could this be a problem of Automap or another MIDIUSB device attached (I also have a M-Audio Radium49)?
Do you have any suggestions?

Hmm I couldn't re-create this behaviour so I'm not quite sure what is going on.
All my sequencers use simple note values to trigger the LED's via the Midi Out's on certain tracks.
My guess is that your midi connection is slowing down your midi data.
You could check this by sending midi notes via your midi out to a hardware synth if you have that.
Also, switching between session and user modes should really be very quick so there's definitely something wrong.
I'm sorry I can't give you a direct solution to your problem, it's hard because I can't recreate this from here and I can't check your setup :S

Is there someone else here who knows what's going on with Der_Makrophag's midi setup?

It seems also to slow down MIDI and Macro Mapping, so when I switch on the mapping button and off again, Live needs some time to get back to the non-mapping state. So this seems to be a general issue.
Unfortunately I do not have a hardware synth (yet). Next days I will not have any time to test, but I will try to do so next week, if I can point out what causes the problem.

[Sarrova-Q]

It seems also to slow down MIDI and Macro Mapping, so when I switch on the mapping button and off again, Live needs some time to get back to the non-mapping state. So this seems to be a general issue.

Hmm I'm afraid it hasn't anything to do with my sequencers, so it's very hard for me to pinpoint you a solution.
My .als files include lots of midi-mapped controls, but this should definitely not slow down Live.
I suggest unplugging all your midi gear, start a new set and rebuild everything until you notice Live slows down.
This way it's possible you find what's causing your midi problems.
Maybe you can start a new thread about this to get more help?

All the best
aurex