UserConfiguration text file for KorgNanokontrol

[SubFunk]

Works OK thank you !

I'll try to program encoders to control PAN and low button as SOLO

I'll keep you posted

anyone got the lower row buttons 1-8 successfully working? for solo for example?

[seismicexplo]

I'm at the wtf stage with banks in Live, can't figure out if I don't understand the concept or if I don't notice the profound change that occurs when I shift up a bank.

i got this working....but:it seems to skip a bank
an easy way to check this is with the impulse-device
turn knob 1...it controls startpoint of pad1(like it should)
but if i press bank up....then knob1 controls start of pad3
press up again and it goes to pad5
i press bank-down....then it also skips(ie:goes from 3 to 1)
on other devices it skips a bank too

so anyone got the bankswitch function working properly?

would be nice if it isnt a bug and i just need to adjust some setting i forgot

cheers
seis.

ps forgot to mention:theres a list in the live-lessons of all the banks of instantcontrol-assignments of all live-devices

[seismicexplo]

ok ,after a few hours of testing..
(i must have tried any cc value option there was)

i found out how to switch to all 8 banks with my nanokontrol

you have to press bank down and hold it then press bank up...then it will switch from bank1 to bank2

and you can switch from bank 8 to 7 by: pressing and holding bank up and then also pressing bank down
(oddly enough you cant go from say bank 4 to 5 by pressing up/down.. ..it only works when switching from bank1 to bank2.....or when switching from bank8 to bank7

to summarise:lets say i just selected operator and i wanted to use bank6(one would assume pressing up 5 times)
(and i have no idea what the bank6 instantmappings are for operator,but you can look it up in the live-lessons)

so to switch from bank1 to bank6:you hold bank-down,then press bank-up also,and then(after releasing both)you press up 2 more times,and you can control the parameters in bank6

confusing yes,but it does let you get from bank1 to bank6 in four button presses

hope this helps anyone

seis.

[dm_hawk]

Thanks - it worked nicely.