R.I.P Hardware Samplers and Turntables

Discussion of music production, audio, equipment and any related topics, either with or without Ableton Live
Tarekith
Posts: 17364
Joined: Fri Jan 07, 2005 11:46 pm
Location: Ableton Forum Administrator
Contact:

Re: R.I.P Hardware Samplers and Turntables

Post by Tarekith » Sat Dec 08, 2012 8:23 pm

There's no such as zero latency hardware either.

v00d00ppl
Posts: 1630
Joined: Thu Sep 08, 2005 3:29 am
Location: Fremont, CA
Contact:

Re: R.I.P Hardware Samplers and Turntables

Post by v00d00ppl » Sat Dec 08, 2012 8:31 pm

Tarekith wrote:There's no such as zero latency hardware either.

This +1

And if you really want to work with a hardware sampler as your main instrument cherish it and learn how to work on the internals on your own. My sample button (F1) key and 0 key are losing response so I am ordering tact switches and doing the soldering myself. I'm gonna keep servicing my gear until the mother board fries!
SSL X Desk / Apollo Twin Solo / Sherman Restyler / Ensoniq EPS Classic / Analog Keys / Handsome Audio Zulu

djadonis206
Posts: 6488
Joined: Thu Jun 17, 2004 4:23 pm
Location: Seattle, WA.

Re: R.I.P Hardware Samplers and Turntables

Post by djadonis206 » Sat Dec 08, 2012 9:54 pm

Octatrack - performance sampler!
Ableton | Elektron

Music

doghouse
Posts: 1413
Joined: Fri Aug 29, 2008 5:30 pm

Re: R.I.P Hardware Samplers and Turntables

Post by doghouse » Sun Dec 09, 2012 5:22 pm

I'll never understand why people get all sentimental over old technology.

I don't miss 8 and 12 bit hardware samplers with sub-CD fidelity. Samplers used to be crazy expensive now you can get pretty much any sampler used for $200 or less.

So if you dig that sound, go buy one and return to the glory days of floppies, SCSI hard drives, MIDI sample dumps, etc.

beatmunga
Posts: 728
Joined: Sat Dec 03, 2011 5:20 pm

Re: R.I.P Hardware Samplers and Turntables

Post by beatmunga » Sun Dec 09, 2012 5:33 pm

Tarekith wrote:There's no such as zero latency hardware either.
True, but the speed of light was good enough for most pro-sumer music makers to make a decent fist of it back in the day.
mendeldrive wrote:NOBODY designs their own sounds... There is ZERO point in reinventing the wheel.

ShelLuser
Posts: 3863
Joined: Sun Dec 06, 2009 10:26 pm
Location: Wageningen, Netherlands

Re: R.I.P Hardware Samplers and Turntables

Post by ShelLuser » Mon Dec 10, 2012 6:07 am

doghouse wrote:I'll never understand why people get all sentimental over old technology.
That's what makes people, people :lol:

Besides; my keyboard is also bigger than yours. Doesn't make as much cool sounds as yours but that's something totally unimportant. Who cares about sound these days? ;-)
So if you dig that sound, go buy one and return to the glory days of floppies, SCSI hard drives, MIDI sample dumps, etc.
This.

More seriously here...

@OP

If you think this stuff is dead, and you feel strong enough about it to start a topic; why not simply revive it?

I can't really comment on the lack / decline of hardware samplers myself, but if that is so then couldn't it make you stand out if you started using those again?

Just saying...
With kind regards,

Peter

Using the 'Power' Trio: Live 10 Suite (+ Push & Max 8 ), Reason 10 and Maschine Mk3 (+ the ultimate Komplete 12).
Blog: SynthFan (under heavy construction!)

southsounder
Posts: 98
Joined: Sun Oct 17, 2010 2:31 am
Location: Olympia

Re: R.I.P Hardware Samplers and Turntables

Post by southsounder » Mon Dec 10, 2012 8:58 am

Ensoniq FTW!!

Every time I think that maybe I should finally sell the ol' ASR-10 rack since it doesn't see much use I fire it up "one last time" and am promptly reminded why I never sell it - because it's simply a fantastic sounding piece of kit.

Tarekith
Posts: 17364
Joined: Fri Jan 07, 2005 11:46 pm
Location: Ableton Forum Administrator
Contact:

Re: R.I.P Hardware Samplers and Turntables

Post by Tarekith » Mon Dec 10, 2012 3:41 pm

beatmunga wrote:
Tarekith wrote:There's no such as zero latency hardware either.
True, but the speed of light was good enough for most pro-sumer music makers to make a decent fist of it back in the day.
Hardly the speed of light, your typically hardwre synths has between 3-10ms of latency for things like keyboard scanning, etc. Not all that different from a decent softsynth set up.

beatmunga
Posts: 728
Joined: Sat Dec 03, 2011 5:20 pm

Re: R.I.P Hardware Samplers and Turntables

Post by beatmunga » Mon Dec 10, 2012 7:17 pm

Tarekith wrote:
beatmunga wrote:
Tarekith wrote:There's no such as zero latency hardware either.
True, but the speed of light was good enough for most pro-sumer music makers to make a decent fist of it back in the day.
Hardly the speed of light, your typically hardwre synths has between 3-10ms of latency for things like keyboard scanning, etc. Not all that different from a decent softsynth set up.
Aaah, you mean digital hardware, not all audio hardware (analog desks for instance).
mendeldrive wrote:NOBODY designs their own sounds... There is ZERO point in reinventing the wheel.

miekwave
Posts: 752
Joined: Fri Aug 03, 2012 8:49 pm
Location: Austin, TX
Contact:

Re: R.I.P Hardware Samplers and Turntables

Post by miekwave » Mon Dec 10, 2012 10:25 pm

Tarekith wrote:
beatmunga wrote:
Tarekith wrote:There's no such as zero latency hardware either.
True, but the speed of light was good enough for most pro-sumer music makers to make a decent fist of it back in the day.
Hardly the speed of light, your typically hardwre synths has between 3-10ms of latency for things like keyboard scanning, etc. Not all that different from a decent softsynth set up.
Acoustic hardware has some latency. The hammer strikes a chord 5-10ms after striking the piano key.
Check out some of my soundtracks. Also Ableton Live Performance video.

ImageImage

Tarekith
Posts: 17364
Joined: Fri Jan 07, 2005 11:46 pm
Location: Ableton Forum Administrator
Contact:

Re: R.I.P Hardware Samplers and Turntables

Post by Tarekith » Tue Dec 11, 2012 12:56 am

Even analog desks have some latency. Let's not forget that sound travels roughly 1 foot per millisecond in a typical room. So complaining about 5 ms latency is like complaining that you can't play because your speakers are 5 feet from your ears.

beatmunga
Posts: 728
Joined: Sat Dec 03, 2011 5:20 pm

Re: R.I.P Hardware Samplers and Turntables

Post by beatmunga » Tue Dec 11, 2012 6:29 am

Tarekith wrote:Even analog desks have some latency. Let's not forget that sound travels roughly 1 foot per millisecond in a typical room. So complaining about 5 ms latency is like complaining that you can't play because your speakers are 5 feet from your ears.
That's not a property of the desk though, is it? Your decent soft synth plus 5 feet of air molecules would double this.

Probably still not too much of a problem.

For me, and I'm guessing many others, latency never seemed to be an issue until we started using computers for music beyond MIDI. Before that, If a piece of hardware sounded out of time when you played it, you got it exchanged or refunded. Science and figures didn't enter into it. This happened to me once, with a cheap Cheetah sampler. All the other racks of keyboards, modules, drum machines, samplers and processors I ever owned were as tight as a gnats chuff, and that's with rigidly quantized electronic music. And my analog desks didn't start sounding late if I used a bus or started adding more EQ...

I'm all for progress and the benefits are generally worth it. But let's not pretend it isn't an issue that sometimes rears it's head in a way that wasn't really an issue before.
mendeldrive wrote:NOBODY designs their own sounds... There is ZERO point in reinventing the wheel.

bastien
Posts: 70
Joined: Fri Oct 20, 2006 10:05 am

Re: R.I.P Hardware Samplers and Turntables

Post by bastien » Tue Dec 11, 2012 12:15 pm

beatmunga wrote:That's not a property of the desk though, is it?
Well it is - I mean, the bigger the mixing desk in front of you, the further away your speakers are... :lol:

beatmunga
Posts: 728
Joined: Sat Dec 03, 2011 5:20 pm

Re: R.I.P Hardware Samplers and Turntables

Post by beatmunga » Tue Dec 11, 2012 12:46 pm

bastien wrote:
beatmunga wrote:That's not a property of the desk though, is it?
Well it is - I mean, the bigger the mixing desk in front of you, the further away your speakers are... :lol:
Quite. But not if you adopt the recommended 'zero latency' listening posture of sitting on the desk with your eardrum resting against the speaker cone.

Anyway, what about if the mixing desk is moving towards you/away from you repeatedly on the back of a truck? The Doppler effect is a bitch to mix to, let alone tune a guitar to.

And anyway anyway anyway anyway what if you are travelling at great speed and relativity kicks in and time starts to slow down etc etc etc
mendeldrive wrote:NOBODY designs their own sounds... There is ZERO point in reinventing the wheel.

beatmunga
Posts: 728
Joined: Sat Dec 03, 2011 5:20 pm

Re: R.I.P Hardware Samplers and Turntables

Post by beatmunga » Tue Dec 11, 2012 12:54 pm

astromass wrote:my sp-404sx has made me not use ABLETON! The loose feel of resampling and the fun effects have me in dream land!
loving it!!!
Saw a great little gig the other day where a duo were using this to trigger and mash up vocal samples on the fly over some 'live sequencing'.

Could have done something similar with software and a controller but they admitted they had more fun!
mendeldrive wrote:NOBODY designs their own sounds... There is ZERO point in reinventing the wheel.

Post Reply