Push Cover / Stand

Discuss Push with other users.
Post Reply
Fossiel
Posts: 202
Joined: Thu Jul 25, 2013 10:56 am

Re: Push Cover / Stand

Post by Fossiel » Wed Aug 14, 2013 4:00 pm

yourfavorite wrote:Here's how I store my Push. Seahorse Case + Decksaver.
That is how I store my defibrillator :p

Looks very pro tho! 8)

apcut
Posts: 20
Joined: Thu Apr 22, 2010 1:10 pm

Re: Push Cover / Stand

Post by apcut » Wed Aug 21, 2013 10:01 pm


Lancer X
Posts: 14
Joined: Mon Sep 17, 2012 11:01 am

Re: Push Cover / Stand

Post by Lancer X » Fri Aug 23, 2013 1:40 am

I bought one of the Rolodex Laptop Stands that others have posted about. It's okay. The feet on Push are not quite wide enough apart to straddle the edges of this stand, so either the right or left feet are kind of touching, and it doesn't sit completely flat on the stand.

I've had a little trouble with the drum pad notes not triggering because the Push wasn't properly seated. The stand is pretty sturdy, but it rattles a little when you are drumming away, which can be a little annoying. A good and fairly affordable interim solution though.

For a Push cover, I bought one from Digital Deck Covers, and it turned out really nice! I also got one for my DJ controller - also just as nice. They make every one of their covers by hand, and have patterns for a very wide selection of devices. Shipped much sooner than I expected for a "custom" cover.

I selected the cheapest version (black nylon), and it is so much higher quality than I expected - a tough synthetic canvas feel, and the underside is sealed with polymer, which presumably would fend off a spilled drink, etc.

Wasn't cheap at $22 USD, but again they were much nicer than I expected. Really cool company. (I am NOT affiliated - just impressed and satisfied.)

Lancer X
Posts: 14
Joined: Mon Sep 17, 2012 11:01 am

Re: Push Cover / Stand

Post by Lancer X » Fri Aug 23, 2013 1:48 am

How sturdy is this stand? Does the Push bounce when you are finger drumming, etc?

Tarekith
Posts: 19140
Joined: Fri Jan 07, 2005 11:46 pm
Contact:

Re: Push Cover / Stand

Post by Tarekith » Fri Aug 23, 2013 2:53 am

Got my Decksaver Push cover yesterday, looks and works great.

Image

fishmonkey
Posts: 4479
Joined: Wed Oct 24, 2007 4:50 am

Re: Push Cover / Stand

Post by fishmonkey » Fri Aug 23, 2013 3:00 am

each to their own, but those things just look like packaging material to me. i'd rather use a nice bit of cloth...

tedlogan
Posts: 1347
Joined: Thu Dec 20, 2012 7:23 pm
Location: Leamington Spa, UK
Contact:

Re: Push Cover / Stand

Post by tedlogan » Fri Aug 23, 2013 10:01 am

Lancer X wrote:
How sturdy is this stand? Does the Push bounce when you are finger drumming, etc?
I bought two for £3.50 each from Ikea, for APC40 and Push, and both fit perfectly. They are completely solid - zero bounciness. Bargain - and the perfect angle for me.

ezelkow1
Posts: 366
Joined: Thu Oct 08, 2009 6:22 pm

Re: Push Cover / Stand

Post by ezelkow1 » Fri Aug 23, 2013 3:25 pm

I also grabbed one of the ikea ones since I happened to be there last week. It does feel sturdier than the rolodex. For me the rolodex is still good, however i started getting a metallic rattling noise when pounding away on it. It seemed to go away when seated in certain positions though

Lancer X
Posts: 14
Joined: Mon Sep 17, 2012 11:01 am

Re: Push Cover / Stand

Post by Lancer X » Sun Aug 25, 2013 4:20 am

Cool - thanks for the Ikea stand feedback, guys! I will post pictures of my Digital Deck Cover tomorrow.

ebenextra
Posts: 84
Joined: Fri May 06, 2005 9:12 am
Location: Taipei

Re: Push Cover / Stand

Post by ebenextra » Mon Aug 26, 2013 1:10 pm

This ikea laptop stand fits the Push perfectly. It's a little less than an inch wider than the push on each side. http://www.ikea.com/us/en/catalog/products/60150176/
It also has a little rubber strip on the bottom to prevent it from sliding

* Sorry for not posting a pic of me using it, my phone's in for repairs, but it is a great stand for the push and super cheap
...silly rabbit ,leave the tricks for the cats!

Tone
Posts: 102
Joined: Fri May 12, 2006 1:02 am
Contact:

Re: Push Cover / Stand

Post by Tone » Sun Sep 01, 2013 1:21 am

http://www.quiklok.com/catalog/?p=produ ... me=LPH-001

holds it nice! upside down for performing too! bestbuy online had it cheapest when I ordered $42 shipped

Image
imagen

Image
screen shot
MacBook Pro 15", 2.0 i7 quad, 16 gb ram, OS X 10.10.2, Live 9.6, PUSH II
https://soundcloud.com/nitepeople

drez
Posts: 552
Joined: Tue Oct 28, 2003 10:23 pm
Location: United States

Re: Push Cover / Stand

Post by drez » Mon Sep 09, 2013 2:16 pm

Great find! I picked up 3 of these at Ikea this weekend. They are solid and the angle is perfect.
http://www.soundcloud.com/dreznicek
MacBook M1 Pro Max, 64Gig RAM, 4TB internal SSD, Live 11, Push1/2/3, Reason, VST O'Plenty

tedlogan
Posts: 1347
Joined: Thu Dec 20, 2012 7:23 pm
Location: Leamington Spa, UK
Contact:

Re: Push Cover / Stand

Post by tedlogan » Mon Sep 09, 2013 2:29 pm

drez wrote:
Great find! I picked up 3 of these at Ikea this weekend. They are solid and the angle is perfect.
Yup, I can also confirm that they are rock solid, and cheaper than a bottle of wine!

Airyck
Posts: 739
Joined: Thu Jul 02, 2009 11:54 pm
Location: Phoenix, AZ

Re: Push Cover / Stand

Post by Airyck » Mon Sep 09, 2013 3:24 pm

I'll give another +1 to the IKEA stand. Good angle and it feels extremely solid when pounding on the pads of the PUSH. No rattle bounce or noise, it's perfect and sooooooo cheap. The only downside for me is that I had to walk around IKEA for 30 minutes to find it.
Ableton Live 10 Suite / Push 2 / Max 8 /

drez
Posts: 552
Joined: Tue Oct 28, 2003 10:23 pm
Location: United States

Re: Push Cover / Stand

Post by drez » Mon Sep 09, 2013 4:09 pm

Airyck wrote:I'll give another +1 to the IKEA stand. Good angle and it feels extremely solid when pounding on the pads of the PUSH. No rattle bounce or noise, it's perfect and sooooooo cheap. The only downside for me is that I had to walk around IKEA for 30 minutes to find it.
Haha! I had that same problem. My daughter and I were walking all over the place. Then when we finally found it, we realized we walked past it twice.
http://www.soundcloud.com/dreznicek
MacBook M1 Pro Max, 64Gig RAM, 4TB internal SSD, Live 11, Push1/2/3, Reason, VST O'Plenty

Post Reply