headphone click track live performance question
headphone click track live performance question
Hello all, I am running Live 9 through an UAD apollo twin.
Basically the question is, Is it possible to get a click track running through my headphones but not through the main output.
I have tried to set up headphone queue 3/4 and tried different options[various online tutorials] but am unable to get the click to come out through headphones only.
sorry if this is confusing..
What I am trying to accomplish - Playing live guitar / vocals looping using ableton but i need to hear click track in headphones to match up with pre recorded beats and to make sure i get looping correct
thanks in advanced
Basically the question is, Is it possible to get a click track running through my headphones but not through the main output.
I have tried to set up headphone queue 3/4 and tried different options[various online tutorials] but am unable to get the click to come out through headphones only.
sorry if this is confusing..
What I am trying to accomplish - Playing live guitar / vocals looping using ableton but i need to hear click track in headphones to match up with pre recorded beats and to make sure i get looping correct
thanks in advanced
-
- Posts: 7033
- Joined: Wed Jun 25, 2014 11:34 am
Re: headphone click track live performance question
Yes it is, provided you have 2 stereo outs. If not you could experiment with 2 mono channels.p0ak wrote:Hello all, I am running Live 9 through an UAD apollo twin.
Basically the question is, Is it possible to get a click track running through my headphones but not through the main output.
I have tried to set up headphone queue 3/4 and tried different options[various online tutorials] but am unable to get the click to come out through headphones only.
sorry if this is confusing..
What I am trying to accomplish - Playing live guitar / vocals looping using ableton but i need to hear click track in headphones to match up with pre recorded beats and to make sure i get looping correct
thanks in advanced
This case described below for cueing tracks for DJing is basically the same set up as the metronome is routed to the Cue Out output in Live's Master Track. Courtesy if G dup (comments section of the linked article):
How to listen to cued tracks through headphones while using a Macbook?.1. Go to options, then preferences, then audio, in my case usb for the scarlett turn 1/2 3/4 input and output on in the output input configuration...
2. press I/O button to turn on cue function on live dashboard...
3.set master out to 1/2...
4. set cue to 3/4
Make some music!
Re: headphone click track live performance question
Thanks for the reply,
I have tried this; My audio interface has a stereo headphone output jack in the front of the unit, also has 4 left/right mono outputs on the back of the unit,
[idk if it is even possible with this interface, i'm guessing it is since I have multiple outs? but someone correct me if i'm wrong]
I went to pref and enabled 3/4 and did the cue thing where the headphone icon appears and tried plugging my headphones into every output and still no change. I messed with routing cue to output 3, 4, 5/6, 7/8, ect..
I also tried having track on, off, volume up, down, headphone monitor volume up, down,.. can't seem to figure it out.
I have done this using a different interface before so I am sort of familiar how it should work, but cannot get it to work using my UAD apollo twin(incase anyone is familiar)
I have tried this; My audio interface has a stereo headphone output jack in the front of the unit, also has 4 left/right mono outputs on the back of the unit,
[idk if it is even possible with this interface, i'm guessing it is since I have multiple outs? but someone correct me if i'm wrong]
I went to pref and enabled 3/4 and did the cue thing where the headphone icon appears and tried plugging my headphones into every output and still no change. I messed with routing cue to output 3, 4, 5/6, 7/8, ect..
I also tried having track on, off, volume up, down, headphone monitor volume up, down,.. can't seem to figure it out.
I have done this using a different interface before so I am sort of familiar how it should work, but cannot get it to work using my UAD apollo twin(incase anyone is familiar)
Re: headphone click track live performance question
Ok so I had the same issue and struggled for a while but found a solution...
1. In Live, enable another set of outputs - 5/6
2. The default for 5/6 in the UAD Console is Virtual 1/Virtual 2 - click on the Virtual 1 label in the channel strip and select Stereo Link
3. Click on the Sends area of the Virtual 1/2 channel strip and pump the HP fader to the top.
4. Make sure you have your Headphone level up and voila, click track in your headphones only.
Cheers!
1. In Live, enable another set of outputs - 5/6
2. The default for 5/6 in the UAD Console is Virtual 1/Virtual 2 - click on the Virtual 1 label in the channel strip and select Stereo Link
3. Click on the Sends area of the Virtual 1/2 channel strip and pump the HP fader to the top.
4. Make sure you have your Headphone level up and voila, click track in your headphones only.
Cheers!
Re: headphone click track live performance question
awesome! I will have to try this when i get home!
Re: headphone click track live performance question
Works great! thank you
-
- Posts: 1
- Joined: Wed Jan 12, 2022 6:07 pm
Re: headphone click track live performance question
I followed all of these steps but still see the metronome click in my OBS. Any suggestions?bbot wrote: ↑Sat May 30, 2015 5:34 amOk so I had the same issue and struggled for a while but found a solution...
1. In Live, enable another set of outputs - 5/6
2. The default for 5/6 in the UAD Console is Virtual 1/Virtual 2 - click on the Virtual 1 label in the channel strip and select Stereo Link
3. Click on the Sends area of the Virtual 1/2 channel strip and pump the HP fader to the top.
4. Make sure you have your Headphone level up and voila, click track in your headphones only.
Cheers!