Tips and Tricks

[niv_ram]

Tip:
If you need to use cv tools use a plugged in sound card on ableton desktop (or a virtual sound card like soundflower) to fill up channels then creates presets for these channels and send the cv tools presets to push you will now be able to control your modular gear.

my questions:
1. What Splitter cable do you guys use for the pedal outs my hosa tip ring y splitter doesnt work?

2. How do you extend a max 4 live device to use abletons browser to load samples on push 2 push 3
This is particularly for granulator 2 i just got my push today its amazing, but this feature would be insane?

[[jur]]

ATM you can't load samples in Granulator from P3S. You need to create a preset (and consolidate, if the used sample isn't also on your Push's) in Live and send it to P3.

[knarrrz]

The CV Tools Pack has been updatet recently, it's now possible to set the outputs directly from Push!

I'm using the Befaco Y Splitter Cable, it works just fine.

[niv_ram]

The CV Tools Pack has been updatet recently, it's now possible to set the outputs directly from Push!

I'm using the Befaco Y Splitter Cable, it works just fine.

I’m not able to set the outs with the most recent download how do you update devices for max for live on push 3 is this possible. The outs on the device it’s self .

[rgarner]

1. What Splitter cable do you guys use for the pedal outs my hosa tip ring y splitter doesnt work?

I'm using 2 Elektron CK-1 kits, mostly because the cables are reversible and I can go out to modular or a full-size MS-20.

[knarrrz]

I’m not able to set the outs with the most recent download how do you update devices for max for live on push 3 is this possible. The outs on the device it’s self .

Yes, you can do everything on Push itself. When you go to the Packs folder, you should see a folder for available updates. You can install it directly from there. Once you have loaded a CV Tools device and it's selected, you have to press the device button again in order to go 'into' the device. Then you should see the device pages showing up, one is called 'Routing', here you can set the outputs.