who's interface isnt supported by the new mactels ?

HD1 · Post by **HD1** » Fri Feb 24, 2006 7:47 pm

so i eagerly loaded the beta onto my dualcore imac, and discovered my interface's drivers werent operating on the mactel chip....I have to wait till they release the new driver.

has this happened with your interface ?

(metric halo)

eyeknow · Post by **eyeknow** » Fri Feb 24, 2006 10:50 pm

what do you have?

I know motu and edirol have posted updates.........

Machinesworking · Post by **Machinesworking** » Sat Feb 25, 2006 12:23 am

RopeyPunter wrote:has this happened with your interface ?

(metric halo)

Hey just to let you know, i talked to a guy from Metric Halo about x86 drivers and they were internally beta testing them, and said it would be at most a few months after release that they were up and running!

What will keep me on my powerbook for a while is Native Instruments, love their stuff, and will wait until at least Reactor is ported.

HD1 · Post by **HD1** » Sat Feb 25, 2006 12:38 am

kenn michael · Post by **kenn michael** » Sat Feb 25, 2006 12:42 am

I think it will be a bit earlier than a few months. B.J. from Metric Halo wrote on the mailing list that the drivers would be released shortly, but Console will still run under Rosetta. He said that Rosetta performance for Console is very fast and therefore doesn't require updating... But the drivers are practically ready.

I have a Mobile I/O too and a MacBook on the way, so I'm anxious about these drivers too!

kenn michael · Post by **kenn michael** » Sat Feb 25, 2006 11:20 am

Universal Binary Mobile I/O drivers are out!!!

http://www.mhlabs.com

shaneblyth · Post by **shaneblyth** » Sat Feb 25, 2006 11:30 pm

m-audio has beta drivers that work but Tadcam have nothing and have not even said they are making a btea yet and simply say they dont recomment the Mac Intels so for anyone with a MacIntel and Tascam send them emails and get them off there fat lazy butts!

band-x · Post by **band-x** » Thu Mar 02, 2006 12:03 am

Bastards at Alesis wont reply to a single mail i send. And I only bought the thing in December.

DO NOT BUY ANYTHING FROM ALESIS EVER

glitchrock-buddha · Post by **glitchrock-buddha** » Thu Mar 02, 2006 1:27 am

Anyone heard anything about presonus and mactels?

grb

Pitch Black · Post by **Pitch Black** » Thu Mar 02, 2006 1:35 am

I'm waiting for RME to make a compatible PCI card for my Multiface.

Three questions:

1, Is this new PCI Express slot referred to as PCI-E, PCI-X, or "ExpressCard/34" ? (the last is what it's called on the Apple tech specs page)

2, Anybody have an email contact for RME support to ask them for a time-frame? (can't find it on their english site)

3, I know the current RME cardbus uses a firewire-type interface, but a custom non-firewire protocol. Can anyone confirm this will also be possible for them to do with the new card format?

Thanks in advance
paddy

minimal · Post by **minimal** » Thu Mar 02, 2006 4:51 am

Pitch Black wrote:I'm waiting for RME to make a compatible PCI card for my Multiface.

Three questions:

1, Is this new PCI Express slot referred to as PCI-E, PCI-X, or "ExpressCard/34" ? (the last is what it's called on the Apple tech specs page)

2, Anybody have an email contact for RME support to ask them for a time-frame? (can't find it on their english site)

3, I know the current RME cardbus uses a firewire-type interface, but a custom non-firewire protocol. Can anyone confirm this will also be possible for them to do with the new card format?

Thanks in advance
paddy

found it in the german version of the site:

[email protected]

good luck!

aueua · Post by **aueua** » Thu Mar 02, 2006 3:40 pm

Hi!
Just to let you know that I successfully tested Live 5.2b4 with M-Audio Ozonic and its 1.7 beta (Universal Binary) drivers on my MacBook Pro 2.0 GHz, 1 GB RAM.
Sound quality is excellent and all the MIDI controls work flawlessly.

As for now, Live also works without problems, but I haven't tested all the features yet.

Cheers!
Aueua

Machinesworking · Post by **Machinesworking** » Thu Mar 02, 2006 3:53 pm

Metric Halo have a driver out now!

2 out of three of the cards I use will work, MOTU 828 and the RME Fireface have drivers, Novation will probably soon.

puRe · Post by **puRe** » Thu Mar 02, 2006 5:40 pm

glitchrock-buddha wrote:Anyone heard anything about presonus and mactels?

grb

they told me it's not supported, but that they are working on it....

kinda perplexing since the drivers for Firepod is written by Apple

Hedroom · Post by **Hedroom** » Wed Mar 15, 2006 4:03 pm

Pitch Black wrote:I'm waiting for RME to make a compatible PCI card for my Multiface.

Three questions:

1, Is this new PCI Express slot referred to as PCI-E, PCI-X, or "ExpressCard/34" ? (the last is what it's called on the Apple tech specs page)

2, Anybody have an email contact for RME support to ask them for a time-frame? (can't find it on their english site)

3, I know the current RME cardbus uses a firewire-type interface, but a custom non-firewire protocol. Can anyone confirm this will also be possible for them to do with the new card format?

I've been in contact with RME and they told me there were no plans set in stone as yet to develop the Express Card interface.

In the meantime I've bought a Fireface 800.

Thanks in advance
paddy

who's interface isnt supported by the new mactels ?

who's interface isnt supported by the new mactels ?

Re: who's interface isnt supported by the new mactels ?

M-Audio Ozonic Working!

Re: who's interface isnt supported by the new mactels ?