Line 6 <> Ableton delay
Line 6 <> Ableton delay
I hope someone can help me. I bought from Line 6 the Toneport UX2, a nice machine to plug in your guitar or microphone. But the the delay problems start. I think i should solve them by setting the delay or predelay on a channel or on the master. Is that the way to go? And any suggestions how many msecs it should be? I work with Ableton Live 5 on a Powermac. Thanx in advance.
ok, mac............coreaudio.........
go to the preferences and make sure that toneport is listed in the two settings under "coreaudio"
If that is already done, open toneport/gearbox to get to THAT set of preferences and check to see what your set at there............
optimal is a matter of choice, depending on you cpu power, but I set up live to run at 24 bit and 96k sampling rate, you can now do that with the latest gearbox/toneport drivers!
at a buffer setting of 512, running with the sample rate at 96 you automatically get a decent ms setting (roughly 5 to 10ms)
if that didn't make sense, repost and I'll try to help more
go to the preferences and make sure that toneport is listed in the two settings under "coreaudio"
If that is already done, open toneport/gearbox to get to THAT set of preferences and check to see what your set at there............
optimal is a matter of choice, depending on you cpu power, but I set up live to run at 24 bit and 96k sampling rate, you can now do that with the latest gearbox/toneport drivers!
at a buffer setting of 512, running with the sample rate at 96 you automatically get a decent ms setting (roughly 5 to 10ms)
if that didn't make sense, repost and I'll try to help more
