all recording panned right or left...help?

UHE is now closed. For Technical Support from Ableton, please go here: http://www.ableton.com/support
Locked
striemel

all recording panned right or left...help?

Post by striemel » Sun May 09, 2004 9:53 am

Just purchased a tascam us-122. Installed the drivers correctly, can monitor playback no prob, but when i try recording my gtr into Live, it only records pan right (if i'm plugged into line-in right). I don't believe it's a Tascam issue because you can't specify how far you want to pan your sound via the tascam.

And anothe issue, I find when I'm recording audio in Live, it records the audio i.e. guitar and the bleed of other clips that I'm playing. How can I eliminate this i.e. only the audio that I'm playing gets recorded without any bleed.

Great forum and thanks for the help.

Specs:
Toshiba Laptop (Satellite)\
Live 3.0
Tascam US-122
512 MB Ram

striemel

One problem solved....one to go: BLEEDING

Post by striemel » Sun May 09, 2004 10:45 am

Ok, just figured out how to get rid of the pan left/right recording issue. But I'm still having problems with the "bleed" issue. I.E. When I'm recording my guitar, the clips that are already playing are bleeding into my guitar clip/track. How do I prevent this?

Thanks.

Guest

Post by Guest » Sun May 09, 2004 6:27 pm

um--what type of guitar/how is it being recorded. If you are using a mic, and listening to Live and its clips over speakers while recording with a mic, of course you'll get bleed into the mic from the speakers. Solution is to use headphones--listen to Live's output via phones so that it is quiet in the room. If you are plugging in direct, you must be recording the master out and not the straight in guitar signal off you soundcard.

Ryan

Guest

Post by Guest » Sun May 09, 2004 7:22 pm

Anonymous wrote:If you are plugging in direct, you must be recording the master out and not the straight in guitar signal off you soundcard.

Ryan
Ryan,

Since I'm recording with headphones, this might be my problem. I'm plugged straight into the Tascam US-122, which is what it is made for and why I bought it i.e. to record straight off my soundcard. So how do I set up your scenario? The US-122 doesn't have a "master out" function, switch, etc. And when I choose "master out" on my track that I'm recording guitar too, I don't get any signal. In other words, I have to use "live in" to get signal, but I'm still getting bleed from any other tracks that are playing...help?

thanks.

Locked