Elektron Machinedrum with Ableton LIVE

Discuss music production with Ableton Live.
Post Reply
Digital Network
Posts: 90
Joined: Mon Aug 20, 2007 6:48 am
Location: Belgium

Elektron Machinedrum with Ableton LIVE

Post by Digital Network » Thu Nov 01, 2007 2:22 pm

Hello everybody,

Since yesterday, I have the elektron machinedrum (great great machine). I play with my MD trought LIVE but that's not sync. How can I sync my MD in LIVE ?

Thank your for your help ...

Cheers,
Vincent
Soft : Ableton 8 - Logic 9
Hard : Machinedrum - Monomachine - Nord 2X - Nord 3 - DSI Poly/Evolver KB - Moog LP - JP-8080 - Waldorf Pulse
Summing : Mixdream XP

Bong Sau
Posts: 102
Joined: Thu Dec 01, 2005 10:46 pm
Location: London

Post by Bong Sau » Thu Nov 01, 2007 2:31 pm

Tarekith will be the person to talk to regarding the MD. You could also try here....

http://www.elektron-users.com/modules/newbb/

micah frank
Posts: 556
Joined: Fri Jun 24, 2005 9:50 pm
Location: Brooklyn, NYC
Contact:

Post by micah frank » Thu Nov 01, 2007 2:37 pm

sync Live to the MD. the MD is famed for its hi res clock. you'll get better results all around.

roby
Posts: 931
Joined: Fri Apr 01, 2005 4:16 pm
Location: CA, USA
Contact:

Post by roby » Thu Nov 01, 2007 3:33 pm

do you have the sync function for your MIDI interface turned on? check under preferences. then you need to follow the MIDI sync instruction on the MD manual (i don't remember much of it, but it's under Global)

sorry if that's too vague... i'm not near my MD at the moment

Digital Network
Posts: 90
Joined: Mon Aug 20, 2007 6:48 am
Location: Belgium

Post by Digital Network » Thu Nov 01, 2007 3:47 pm

I don't have midi interface. I connect my MD direct into my sound card PRESONUS Firebox. Must I buy a midi interface to sync my MD in LIVE ?
Soft : Ableton 8 - Logic 9
Hard : Machinedrum - Monomachine - Nord 2X - Nord 3 - DSI Poly/Evolver KB - Moog LP - JP-8080 - Waldorf Pulse
Summing : Mixdream XP

Bong Sau
Posts: 102
Joined: Thu Dec 01, 2005 10:46 pm
Location: London

Post by Bong Sau » Thu Nov 01, 2007 3:51 pm

I'd be very surprised if the Firebox didn't have MIDI I/O. Check your manual...

Sales Dude McBoob
Posts: 2844
Joined: Thu Dec 02, 2004 9:34 pm
Location: Durham, NC. USA
Contact:

Post by Sales Dude McBoob » Thu Nov 01, 2007 4:36 pm

I believe the Firebox has a breakaway cable with midi I/O. So, yes you do have a midi interface.

roby
Posts: 931
Joined: Fri Apr 01, 2005 4:16 pm
Location: CA, USA
Contact:

Post by roby » Thu Nov 01, 2007 4:38 pm

Yeah, you need to connect the MD to the Firebox with MIDI cables as well to sync Live to it. So you connect MIDI Out from Firebox to MIDI In MD. Then read the manual for the MD on how to enable MIDI sync. You basically want to set the MD to receive an external sync. After that, read the Live manual on how to enable sync under Preference, which is basically telling the MIDI out interface to send a sync signal. This way you will be able to control the tempo of the MD with Live.

It is also possible to route the MD and Live so that the MD can control Live's tempo. I suggest you follow and figure out how to do the above first. I'm pretty sure that once you have it set up and read the manuals, you'll be able to figure how to do it this other way as well.

Good luck...

(sorry, i'm not in the studio right now, otherwise i would give you more detailed instructions)

Digital Network
Posts: 90
Joined: Mon Aug 20, 2007 6:48 am
Location: Belgium

Post by Digital Network » Thu Nov 01, 2007 4:50 pm

Good news, I have a midi input on my FIREBOX but the bad news, I don't have a midi cable ... :(
Soft : Ableton 8 - Logic 9
Hard : Machinedrum - Monomachine - Nord 2X - Nord 3 - DSI Poly/Evolver KB - Moog LP - JP-8080 - Waldorf Pulse
Summing : Mixdream XP

smartass303
Posts: 880
Joined: Thu Feb 15, 2007 3:14 pm

Post by smartass303 » Thu Nov 01, 2007 4:52 pm

So,
jump in the Bus, ride to the next music store and buy the cable! Its just a few Euros!!!
The shops are still open in Belgium, arent they?

303

roby
Posts: 931
Joined: Fri Apr 01, 2005 4:16 pm
Location: CA, USA
Contact:

Post by roby » Thu Nov 01, 2007 5:02 pm

i'm assuming they are not unless they open late... but what do i know :lol:

Clearscreen
Posts: 1743
Joined: Sun Jul 11, 2004 5:07 am
Location: Melbourne AU
Contact:

Post by Clearscreen » Thu Nov 01, 2007 11:11 pm

micah frank wrote:sync Live to the MD. the MD is famed for its hi res clock. you'll get better results all around.
i prefer to sync my monomachine to live as that way PDC (plugin delay compensation) remains active and everything coming through live stays in sync audiowise. otherwise i might have a sound coming from the mono and it's out of sync with the stuff in live due to latency somewhere in the plugin chains...

and the mono works fine with live 6 as master once you set the midi delay in the sync out correctly.
Hp Elitebook 2.8Ghz. Live 7.0.14 & Live 8.1.5, XP Pro. and stuff...

Digital Network
Posts: 90
Joined: Mon Aug 20, 2007 6:48 am
Location: Belgium

Post by Digital Network » Fri Nov 02, 2007 5:12 pm

Ok, I bought MIDI cables and nothing works ! No sync between MD and ABLETON.
I followed all instructions in LIVE and in MD ...

Can you help me please ?

Cheers,
Vincent
Soft : Ableton 8 - Logic 9
Hard : Machinedrum - Monomachine - Nord 2X - Nord 3 - DSI Poly/Evolver KB - Moog LP - JP-8080 - Waldorf Pulse
Summing : Mixdream XP

Post Reply