who of you MPD 24 users got the transport control working?

DJ VAKIS · Post by **DJ VAKIS** » Tue Apr 01, 2008 8:00 am

How long it takes to upgrade?10 min and still upgrading.
If i look at the MPD LCD,it says Upgrade 35 07 RECEIVING.
Am i in the right way?

DJ VAKIS · Post by **DJ VAKIS** » Tue Apr 01, 2008 8:52 am

It works.
Thanks guys.

v00d00ppl · Post by **v00d00ppl** » Tue Apr 01, 2008 9:07 pm

so it took longer than 10 minutes to do the upgrade? did it freeze over?

pr0jekt2501 · Post by **pr0jekt2501** » Tue Apr 01, 2008 9:19 pm

v00d00ppl wrote:so it took longer than 10 minutes to do the upgrade? did it freeze over?

it only took a few seconds to upgrade.

greg0ryk · Post by **greg0ryk** » Tue Apr 01, 2008 10:30 pm

My MPD 24 was fried after the 1.09 upgrade too. They said it was hardware, and I am going to have to send in in for repair. However, seeing as I will be out the shipping costs to send back a product that was rendered useless after an update that AKAI themselves created. Seems like poor customer concern.

Michael Hatsis · Post by **Michael Hatsis** » Wed Apr 02, 2008 1:05 am

Have any of you Tried our MPD ACCESS Program?
That will easily get the Transport controls on your MPD24 to send out Notes which you can map to whatever you want in Live?

http://www.trackteamaudio.com/forum/php ... .php?t=132

greg0ryk · Post by **greg0ryk** » Wed Apr 02, 2008 6:56 pm

just a little late, but I will try it once I get the MPD back from them. Thanks!

v00d00ppl · Post by **v00d00ppl** » Wed Apr 02, 2008 11:00 pm

mike@TrackTeam Audio wrote:Have any of you Tried our MPD ACCESS Program?
That will easily get the Transport controls on your MPD24 to send out Notes which you can map to whatever you want in Live?

http://www.trackteamaudio.com/forum/php ... .php?t=132

hey, i am trying to register but that confirmation code generator is acting up. its saing i mistyped it after each new attempt.

v00d00ppl · Post by **v00d00ppl** » Wed Apr 02, 2008 11:02 pm

greg0ryk wrote:My MPD 24 was fried after the 1.09 upgrade too. They said it was hardware, and I am going to have to send in in for repair. However, seeing as I will be out the shipping costs to send back a product that was rendered useless after an update that AKAI themselves created. Seems like poor customer concern.

co-sign. thats why the next padkontroller i am getting will be by korg....i cant stand akai's service.

Michael Hatsis · Post by **Michael Hatsis** » Thu Apr 03, 2008 3:38 am

v00d00ppl wrote:
mike@TrackTeam Audio wrote:Have any of you Tried our MPD ACCESS Program?
That will easily get the Transport controls on your MPD24 to send out Notes which you can map to whatever you want in Live?

http://www.trackteamaudio.com/forum/php ... .php?t=132
hey, i am trying to register but that confirmation code generator is acting up. its saing i mistyped it after each new attempt.

Weird, we've had lots of registrations since the forum was put back up. What web browser are you using? also i believe the capcha is case sensitive. Try again, and if its no go then PM me with your email and ill send it over to you...

Mike

bosonHavoc · Post by **bosonHavoc** » Thu Apr 03, 2008 9:10 am

formatk wrote:
DJ VAKIS wrote:
dcease wrote:go to www.akaipro.com . get to download page. download firmware 1.09, and Vyzex software. install Vyzex software. delete current firmware on mpd by unplugging, and pressing <</stop/rec at the same time while replugging. open vyzex, under midi, select transmit midix(.syx) file. navigate to the firmware you downloaded. select. the mpd24 will receive, when it is done, before you do anything else, close down vyzex software. press enter on mpd24, and viola! firmware updated. press edit, and a transport button. press enter, then turn knob to change from mmc to control. press enter. leave edit mode, open live, make sure that mpd24 is on/on/on in midi pref. go to midi map, and assign the transport to live's transport. save to default. you'll have to do this every time you open an old project, or something new diff. from the default, but once the old project is saved, it'll open with the transport mapped.

on live7.0.3, osx 10.5.1

hth
When you do this,the mpd needs to be connected with midi?or only usb?
I am on mac 10.4.10
Thanks
USB only

sweet thanks... i can cut bomes midi translator out of like 95% of my sets now. now if only ableton would patch in key assignments to midi notes/cc life would be grand!! hehe

(key assignments meaning enter, delete, space bar, hot key commands)

o and a master channel strip and ........

Ozias Leduc · Post by **Ozias Leduc** » Fri Apr 04, 2008 3:00 pm

the new (live 7.03) mpd24 support is great - except it doesn't map the transport buttons. you have to manually map them for each live set (or in the template i guess).

Kobalt · Post by **Kobalt** » Sun Apr 06, 2008 5:54 pm

Hi,

I didn't check the forum for some days so this may be redundant...

here is a way to update the mpd 24 to OS 1.09 with a OSX 10.5 mactel should you have the same problem some of us had (update via vyzex -> dead mpd24) :

1. get SysEx Librarian (free) : http://www.snoize.com/SysExLibrarian/
2. get MPD24 OS 1.09 (mpd24_v1_09.syx) : http://www.akaipro.com/contentmgr/showd ... /1122/tt/5
3. unplug MPD24’s USB cable and reconnect it while holding down three of the five front panel transport bar buttons at the same time : <<, STOP, & REC.
4. MPD24 will now power-up displaying the following on its front panel LCD display : Upgrade ERASE OK? -> PRESS ENTER on the MPD
5. MPD24 will now inform you it is ready to proceed with the update by displaying the following on its front panel display : Upgrade 00 SEND SYSEX
6. launch SysEx Librarian
7. choose MPD24 as destination (I chose the first instance in the list)
8. add mpd24_v1_09.syx
9. play mpd24_v1_09.syx
10. wait till MPD24 finish receiving its new OS...
11. done.

Hope this helps
cheers
k

v00d00ppl · Post by **v00d00ppl** » Mon Apr 07, 2008 3:21 am

Kobalt wrote:Hi,

I didn't check the forum for some days so this may redundant...

here is a way to update the mpd 24 to OS 1.09 with a OSX 10.5 mactel should you have the same problem some of us had (update via vyzex -> dead mpd24) :

1. get SysEx Librarian (free) : http://www.snoize.com/SysExLibrarian/
2. get MPD24 OS 1.09 (mpd24_v1_09.syx) : http://www.akaipro.com/contentmgr/showd ... /1122/tt/5
3. unplug MPD24’s USB cable and reconnect it while holding down three of the five front panel transport bar buttons at the same time : <<, STOP, & REC.
4. MPD24 will now power-up displaying the following on its front panel LCD display : Upgrade ERASE OK? -> PRESS ENTER on the MPD
5. MPD24 will now inform you it is ready to proceed with the update by displaying the following on its front panel display : Upgrade 00 SEND SYSEX
6. launch SysEx Librarian
7. choose MPD24 as destination (I chose the first instance in the list)
8. add mpd24_v1_09.syx
9. play mpd24_v1_09.syx
10. wait till MPD24 finish receiving its new OS...
11. done.

Hope this helps
cheers
k

i tried this on the pc with midi ox.......my shit is fried now. fuck akai.

v00d00ppl · Post by **v00d00ppl** » Mon Apr 07, 2008 3:28 am

edit: i just did the vyzex method and that works for me instead. everything is back to normal.

who of you MPD 24 users got the transport control working?

MPD 24 Failure

Re: MPD 24 Failure