Polyphonic Aftertouch?

[yop53]

Hi,

will the new Live 8 support Polyphonic Aftertouch?
It'd be so great, especially when using E-drum and Drum-VSTs.

See ya!

[3dot...]

the instruments do...

[yop53]

the instruments do...

Hi,
can you give me more explanations?

I've tried to play with a Roland TD-9 and the Polyphonic Aftertouch signals were not recorded

Tkx

[3dot...]

well...on each instrument's modulation section you'll find an aftertouch param...which can be used...
try and use it...
also in your recorded midi clips go to clip envelopes...
choose 'midi control' and then 'channel pressure' below...to see if after touch is recorded..

[yop53]

I've tried, but I can't see any Channel Pressure changes

[3dot...]

I don't have a keyboard with afterTouch to check...but it's supposed to...
what port is the keyboard connected through?

[yop53]

I don't have a keyboard with afterTouch to check...but it's supposed to...
what port is the keyboard connected through?

I've tried with an E-Drum Roland TD-9 connected on my Edirol UA-101 soundcard.
In the mide tab of Sampler, I can see footctrl but not Channel Pressure.

Should I asign a control surface in Live prefs?

[3dot...]

I don't have a keyboard with afterTouch to check...but it's supposed to...
what port is the keyboard connected through?

I've tried with an E-Drum Roland TD-9 connected on my Edirol UA-101 soundcard.
In the mide tab of Sampler, I can see footctrl but not Channel Pressure.

Should I asign a control surface in Live prefs?

nope.
in samplers midi tab you have 'Chan Pressure'... just assign it to the filter or something...set it to 100...
activate the filter and check if it responds...

[yop53]

No reponse
But I don't want to waist your time 3dot,
I hope I't will be ok in Live 8.