[amo] 8b3: Automapping BCR2000 -> Operator

musick · Post by **musick** » Sat Jan 24, 2009 10:51 pm

The BCR2000 knobs 7 and 8 are not automapped to Operator vel and level (as in Live 7) when Operator is selected. knobs 1 to 6 works ok (same as Live 7).

Tone Deft · Post by **Tone Deft** » Sat Jan 24, 2009 11:30 pm

confirmed.

although my SL25 shows that those two knobs aren't assigned to anything, their LCD readouts are blank for the last two knobs on the A, B, C and D banks. the banks further than that have all 8 knobs populated.

musick · Post by **musick** » Sun Jan 25, 2009 12:20 am

Related: The mapping from BCR to the Multiband is not as one would expect

Amaury · Post by **Amaury** » Thu Jan 29, 2009 11:53 am

Hi,

Can you check if the Operator mapping problem is fixed in the latest beta?

Related: The mapping from BCR to the Multiband is not as one would expect

Can you elaborate on this?

Regards,
Amaury

Amaury · Post by **Amaury** » Fri Feb 06, 2009 6:34 pm

Hi,

Sorry to insist, but if you'd like something fixed, please get back to explain what you meant. Or, may I lock this thread?

Regards,
Amaury

musick · Post by **musick** » Sat Feb 07, 2009 9:45 pm

Sory, missed this post....

In 8.0b07 it is still the same, knob 7 and 8 are not mapped to vel and level (looks they are not auto mapped at all).

musick · Post by **musick** » Sat Feb 07, 2009 9:53 pm

Amaury wrote:
Related: The mapping from BCR to the Multiband is not as one would expect
Can you elaborate on this?

The auto mapping seems not very logical to me, I would find it easier to have one or two banks for each frequency band.

Amaury · Post by **Amaury** » Mon Mar 09, 2009 1:32 pm

Hi,

The problem discussed here should be fixed in the next beta (b17).

Regards,
Amaury

[amo] 8b3: Automapping BCR2000 -> Operator

[amo] 8b3: Automapping BCR2000 -> Operator

Re: [amo] 8b3: Automapping BCR2000 -> Operator