input latency!

UHE is now closed. For Technical Support from Ableton, please go here: http://www.ableton.com/support
Locked
clipperer
Posts: 593
Joined: Tue Jan 11, 2005 4:24 pm

input latency!

Post by clipperer » Fri Jan 14, 2005 1:31 am

why is input latency so long.i connected mic to live,and when i sing there is atleast one seckond between i hear the reflection..my soundcard is audigy 2/24 bit with asio support.
But also i can record only when audio settings its set on mme/directx,and when i make latency to 5 ms,then somekinda sound destroing is going on..but when i try to record when audio is set on asio i cant hear the sound at all
just tell me how to get sound direct?

Komplex
Posts: 861
Joined: Wed Jun 09, 2004 11:27 pm
Location: Melbourne
Contact:

Post by Komplex » Fri Jan 14, 2005 3:50 am

I think its just the soundcard. It's probably not a very good soundcard but I haven't used that particular model so can't really help.

My advice would be to buy a better card...

clipperer
Posts: 593
Joined: Tue Jan 11, 2005 4:24 pm

Post by clipperer » Fri Jan 14, 2005 4:51 am

i really wish its not the soundcard but what good soundcards can you suggest

tylast
Posts: 652
Joined: Thu Jun 19, 2003 10:58 pm

Post by tylast » Fri Jan 14, 2005 3:38 pm


clipperer
Posts: 593
Joined: Tue Jan 11, 2005 4:24 pm

Post by clipperer » Fri Jan 14, 2005 4:05 pm

oh tylast!!!!!!!!!!! you really helped me out ! big thanx .but can anybody tell how to make latency ms to 0 cause i still have a small latency

StompyJ
Posts: 417
Joined: Sun Jun 27, 2004 3:33 pm

Post by StompyJ » Fri Jan 14, 2005 6:10 pm

it is physically impossible to have 0 latency. What you need to do is to turn off the "0" latency version, and just listen to the delayed version.

HTH
no longer needed. this is for you. you know who you are.

clipperer
Posts: 593
Joined: Tue Jan 11, 2005 4:24 pm

Post by clipperer » Fri Jan 14, 2005 6:41 pm

yes but then it cuts of live performing and recording with background

mr-e
Posts: 344
Joined: Thu Dec 30, 2004 7:43 am

Post by mr-e » Fri Jan 14, 2005 8:16 pm

set your latency to something between 7 and 20 depending on how far you can push your system before it starts to cracle

hardware synths/samplers usually have a latency below 10 , but you can still play live guitar through ableton at 14 millisec without too much delay between your plectrum plucking the snares and the guitarsound coming out of the boxes

if you are going to record the guitartrack , afterwards , i suggest you cut of 10 milisec from the beginning of the track to compensate for the delay while playing

vangroover
Posts: 44
Joined: Thu Nov 04, 2004 6:09 am

Post by vangroover » Tue Jan 18, 2005 6:26 pm

i also have major latency problems with the firewire4/10.
so bad it makes it unusable.
Intel G4 Duo 2GHZ / 2G of Ram / OS 10.4.8 / UC-33 controller / Live 6.0.3

clipperer
Posts: 593
Joined: Tue Jan 11, 2005 4:24 pm

Post by clipperer » Tue Jan 18, 2005 7:19 pm

i pushed my latency to 3 ms with that 'asio for all' driver !

Locked