FW410 MIDI question

squirmel · Post by **squirmel** » Wed Feb 02, 2005 1:17 am

Off Topic: this question is about the fw410, not Live per se. I am running Live for OSX. (praises, for the record: live rocks, operator rocks.)

The goal here is to get more keys playing into live than there are on my USB Remote25. So I plug the MIDI OUT from a Korg Wavestation EX into the MIDI IN of the fw410. I select fw410 in Live's preferences. I set the Korg MIDI section to "Transmit". But it won't control Live. I have tried this with an ol'skool JUNO106 and a Studiologic weighted 88, too, to no avail.

Bottom line: I don't know how to use the midi section of the fw410.

The fw410 preferences panel is all about the audio: nothing here about MIDI. The fw410 manual doesn't talk much about midi either. There is no LED to indicate MIDI Data received.

Ideas?

grover · Post by **grover** » Wed Feb 02, 2005 2:44 am

there isn't a midi activity indicator in the M-audio mixer app but there is one in Live -- does it indicate it is receiving input?

I have used the MIDI ports on the fw410 and fw1814 with no problems, fwiw.

squirmel · Post by **squirmel** » Wed Feb 02, 2005 3:20 am

Thanks for the fwendly reply, grover. So it sounds to you like I am doing this right? It should be so simple! Does it make sense that Live shows two "FireWire 410" MIDI devices? (OSX's Audio MIDI Setup also shows two.)

I do get MIDI indication in Live via USB (O8 and R25 controllers). But selecting the fw410 in Live in the Preferences panel and in the Track yields no indication. Not even with the Novation R25's MIDI OUT. And that goes for either of the two (

) instances of "FireWire 410" that show up in live.

Oh, by the way, I can send midi *out* from Live via the fw410. e.g. I can play the Juno with a USB controller... go figure!

fw-fw-fw-fwustwating!

oddible · Post by **oddible** » Sat Feb 12, 2005 7:37 pm

I have the same problem with my M-Audio 410 with Windows. I can get MIDI input from my UC-33 just fine but if I pulg MIDI into the 410 I get nothing - must be something obvious but I'm not getting it.

mike holiday · Post by **mike holiday** » Sat Feb 12, 2005 9:43 pm

hmmmm

i send midi into my 410 and it works fine (putting standalone softsynth on my powerbook and sending midi out my oxygen8 into 410)

squirmel · Post by **squirmel** » Sun Feb 13, 2005 1:34 am

now i have three "Firewire 410"'s showing up in my live preferences!

all the same I've found enough workarounds to keep jamming...

hacktheplanet · Post by **hacktheplanet** » Sun Feb 13, 2005 10:35 am

Not sure if this is going to help, but my first interface was a 410, and a few weeks into owning it, the MIDI just stopped working. I tried it on other machines, and it just didn't work. I bought it from audiomidi.com, and they exchanged it for me with minimal hassle. audiomidi.com rocks. I'm using an 1814 now. Aside from the occasional audio drop outs (fuck you M-Audio), it works fine. I have a 12" G4 iBook 1.02 ghz.