Ableton Live and Behringer FCB1010 set up issues.
Re: Ableton Live and Behringer FCB1010 set up issues.
You need to install something like MIDI Monitor to check whether you've set up the pedal correctly.
-
peepingtom
- Posts: 5
- Joined: Mon Jan 30, 2012 12:57 pm
Re: Ableton Live and Behringer FCB1010 set up issues.
Hi people, it s me again.
I solved the problem.
I wrote to the behringer s swiss representative and they told me this :
Sometimes the pedals default values are not calibrated, so you have to fix this.
turn the pedal of.
keep pressed pad 1 and 3, while you re switching on.
Release the pads when the display blanks.
then the leds flashes one by one. Wait til led's switches 1 and 2 stay.
Depress all footswitches one by one, even up and down, till all leds are off.
Then it s written f1, or A1 (if you connected midi out with in, it means midi works).
Press down once
Adjust the pedal :
Pedal A heel down, minimum value. press up.
pedal A toe down, max value, press up
Same for pedal B.
Then it comes back to normal, and it s fixed.
Select a patch where pedals are used to try it.
Big up!
I solved the problem.
I wrote to the behringer s swiss representative and they told me this :
Sometimes the pedals default values are not calibrated, so you have to fix this.
turn the pedal of.
keep pressed pad 1 and 3, while you re switching on.
Release the pads when the display blanks.
then the leds flashes one by one. Wait til led's switches 1 and 2 stay.
Depress all footswitches one by one, even up and down, till all leds are off.
Then it s written f1, or A1 (if you connected midi out with in, it means midi works).
Press down once
Adjust the pedal :
Pedal A heel down, minimum value. press up.
pedal A toe down, max value, press up
Same for pedal B.
Then it comes back to normal, and it s fixed.
Select a patch where pedals are used to try it.
Big up!