Mixing vocals in ableton 8

sohnamo · Post by **sohnamo** » Wed Oct 26, 2011 8:25 pm

Could anyone give me the correct settings to make my vocals sound real clear in live?

Thanks

rdevries · Post by **rdevries** » Thu Oct 27, 2011 9:51 am

As more knowledgeable people will tell you: there is no single correct setting.
Start with a good microphone/preamp and soundcard to get a proper level signal into Live (the audiowaves should at least be visible in a recorded clip).
Then it is a matter of dialing in the vocalamp and equalizer in the plugin you use. Especially EQ is important: try to cut/boost different frequencybands to shape the sound.
Good luck

diogo_semedo · Post by **diogo_semedo** » Thu Oct 27, 2011 12:45 pm

Quick tips:
1. Eq is the first way to go, try to cut frequencies that may even seem absurd
2. Compression: long attack with short release. Makes the vocal come out buy compressing the middle of the vocal.
3. Some delay
4. Some reverb

Try different settings.

DS

sohnamo · Post by **sohnamo** » Thu Oct 27, 2011 4:13 pm

ok thanks because im using the internal mic on the mac until i get a better microphone.

simmerdown · Post by **simmerdown** » Thu Oct 27, 2011 4:24 pm

i made a chain with eq, then compression, then reverb and saved it...each vocal has to be mixed to taste depending on the recording, and the track you are trying to fit it onto..thats a good place to start though....

sohnamo · Post by **sohnamo** » Fri Oct 28, 2011 2:39 am

i have one other question i was recording today and the vocals was better but how do i get rid of that sound from the internal mic?

rdevries · Post by **rdevries** » Fri Oct 28, 2011 8:06 am

how do you mean? you hear the mic-input when you stop playing back a clip?
if you disarm the track (record-disable) the input from the mic will not be heard.

sohnamo · Post by **sohnamo** » Fri Oct 28, 2011 10:40 am

no it's the humming sound that the internal mic makes.but after i record and listen i still can hear the humming sound in the background in the track is it any way i can silence that out?

lyovino · Post by **lyovino** » Sat Oct 29, 2011 4:47 pm

Dude, for the time being, you can invest in a cheap mic, (Shure SM58 or comparable..)
You will notice a big change in your posting problems.. What you are experiencing is low quality of the built in.
You can sit there and eq until the cows come home but the bottom line is the mic. JMO

sohnamo · Post by **sohnamo** » Sat Oct 29, 2011 4:54 pm

I had a thx usb mic but had to sell it because i really needed the money so for now i just have to use the built in.

simmerdown · Post by **simmerdown** » Sat Oct 29, 2011 5:05 pm

go into the sound settings of your comp...make sure the 'mic boost' is off...also try to rec at a very low level and bring it up as needed..

try audacity or some other free program for some sound reduction, then follow the advice above...maybe about the best you can do....

rdevries · Post by **rdevries** » Sat Oct 29, 2011 5:17 pm

an inbuilt mic will not give an acceptable noiselevel, like said you can try eq-ing.

sohnamo · Post by **sohnamo** » Sat Oct 29, 2011 5:34 pm

ok i will try that thanks.

simmerdown · Post by **simmerdown** » Sat Oct 29, 2011 5:47 pm

people work with what they have, 'acceptable' is subjective....

rdevries · Post by **rdevries** » Sun Oct 30, 2011 8:11 am

^^true, the important thing is that you have fun.

Mixing vocals in ableton 8

Mixing vocals in ableton 8

Re: Mixing vocals in ableton 8

Re: Mixing vocals in ableton 8

Re: Mixing vocals in ableton 8

Re: Mixing vocals in ableton 8

Re: Mixing vocals in ableton 8

Re: Mixing vocals in ableton 8

Re: Mixing vocals in ableton 8

Re: Mixing vocals in ableton 8

Re: Mixing vocals in ableton 8

Re: Mixing vocals in ableton 8

Re: Mixing vocals in ableton 8

Re: Mixing vocals in ableton 8

Re: Mixing vocals in ableton 8

Re: Mixing vocals in ableton 8