Re:How to use my Multiface 1 without cardbus

Discuss music production with Ableton Live.
Post Reply
djsanjeev
Posts: 93
Joined: Sun Jan 29, 2006 9:02 pm
Location: Bombay

Re:How to use my Multiface 1 without cardbus

Post by djsanjeev » Mon Jul 15, 2013 10:17 am

Hi
Contemplating on buying an Apogee Duet/Quartret after being blown away by the sound quality on Ableton.Been a user of Motu Ultralite 1 since 5 years.

My dilemma is:

1.Should i buy the Apogee card ?
2.How does Ultralite compare to an apogee.Is it worth the upgrade in terms of sonic capibilities?Will the difference be massive or negligible?

I did an extensive google search and most of the formus said RME compares to Apogee

I have a Multiface 1 (old generation from 2005)with cardbus slot connector thru firewire.How will the older generation Multiface compare to the new generation Apogee Duet/Quartret or Motu Ultralite Mark 1

Another problem is hooking up the Multiface 1 to the 2011 MBP as no cardbus slot(just firewire) .If the multiface is truly worth the sonic arsenal..any hack/patch recommended to bypass their proprietery cardbus firewire interface and connect to onboard Mac Firewire port


Too many questions..Utterly confused!

Please advise
Mobile setup: MacBook Pro (Retina, 15-inch, Late 2018) ,Live Suite 10.1.6 64 BIT,512 GB SSD ,8GB RAM ,OSX 10.11 El Capitan,Oxygen 8

Studio Setup :Mac Studio M1, ,Sonama,Novation SL49 MK11,UAD Apollo Twin Thunderbolt

hoffman2k
Posts: 14718
Joined: Tue Jun 15, 2004 6:40 pm
Location: Belgium
Contact:

Re: Re:How to use my Multiface 1 without cardbus

Post by hoffman2k » Mon Jul 15, 2013 10:37 am

Look into "Multiface Disconnect Mode". I'll be honest to be quite confused about the documentation, but if I understand it correctly: You can configure the multiface to be an AD/DA convertor. You do this with the totalmix software. After that, you can pipe the Lines over ADAT without requiring the PCI connection.
Can't go wrong with Apogee. They have a great service and their products sound excellent.
Coming from RME, the Ultralite might be step down. But it really depends of what you actually hook up to these things.
The 828 with the Multiface would give you a lot of Line I/O's.

djsanjeev
Posts: 93
Joined: Sun Jan 29, 2006 9:02 pm
Location: Bombay

Re: Re:How to use my Multiface 1 without cardbus

Post by djsanjeev » Mon Jul 15, 2013 11:22 am

I want to use it with Ableton live for live Djaying
using the multi outs connected to different channels on a DJ mixer for mixing
Mobile setup: MacBook Pro (Retina, 15-inch, Late 2018) ,Live Suite 10.1.6 64 BIT,512 GB SSD ,8GB RAM ,OSX 10.11 El Capitan,Oxygen 8

Studio Setup :Mac Studio M1, ,Sonama,Novation SL49 MK11,UAD Apollo Twin Thunderbolt

ikeaboy
Posts: 1685
Joined: Sat Jun 05, 2004 9:38 pm
Location: Ireland

Re: Re:How to use my Multiface 1 without cardbus

Post by ikeaboy » Mon Jul 15, 2013 1:08 pm

I still use a Multiface 1, I have yet to find any information that the latest Multiface 2 is a big enough improvement to motivate a switch. You can use the multiface in "Disconnect mode" but I haven't tried it. If you want to connect it directly to your 2011 Mbp your going to need the RME expresscard and (unless your mbp have an expresscard slot, the bigger ones do I think) you'll nedd a thunderbolt to expresscard adaptor. Could be the bones of €500.

fishmonkey
Posts: 4479
Joined: Wed Oct 24, 2007 4:50 am

Re: Re:How to use my Multiface 1 without cardbus

Post by fishmonkey » Tue Jul 16, 2013 2:27 am

if it's primarily for live DJ work then the small differences in audio quality won't matter, nobody will hear them.

djsanjeev
Posts: 93
Joined: Sun Jan 29, 2006 9:02 pm
Location: Bombay

Re: Re:How to use my Multiface 1 without cardbus

Post by djsanjeev » Tue Jul 16, 2013 7:59 am

Hi
My motu card is giving some problems hence the necessity for a backup sound card
Mobile setup: MacBook Pro (Retina, 15-inch, Late 2018) ,Live Suite 10.1.6 64 BIT,512 GB SSD ,8GB RAM ,OSX 10.11 El Capitan,Oxygen 8

Studio Setup :Mac Studio M1, ,Sonama,Novation SL49 MK11,UAD Apollo Twin Thunderbolt

djsanjeev
Posts: 93
Joined: Sun Jan 29, 2006 9:02 pm
Location: Bombay

Re: Re:How to use my Multiface 1 without cardbus

Post by djsanjeev » Tue Jul 16, 2013 10:22 am

It does make a huge difference on playback.I was playing on a motu ultralite and then a dj took over after me with an Apogee Duet and the speakers just exploded with the clarity and punch of each track.
Mobile setup: MacBook Pro (Retina, 15-inch, Late 2018) ,Live Suite 10.1.6 64 BIT,512 GB SSD ,8GB RAM ,OSX 10.11 El Capitan,Oxygen 8

Studio Setup :Mac Studio M1, ,Sonama,Novation SL49 MK11,UAD Apollo Twin Thunderbolt

fishmonkey
Posts: 4479
Joined: Wed Oct 24, 2007 4:50 am

Re: Re:How to use my Multiface 1 without cardbus

Post by fishmonkey » Tue Jul 16, 2013 10:26 am

djsanjeev wrote:It does make a huge difference on playback.I was playing on a motu ultralite and then a dj took over after me with an Apogee Duet and the speakers just exploded with the clarity and punch of each track.
was he playing exactly the same tracks as you, in the same format, at the same level?

Post Reply