Share your favorite Ableton Live tips, tricks, and techniques.
-
protonic65
- Posts: 2
- Joined: Tue Feb 14, 2006 6:16 pm
- Location: Weehawken, New Jersey USA
-
Contact:
Post
by protonic65 » Tue Feb 14, 2006 6:30 pm
Hello All;
I have a dedicated to music laptop, Dell Latitude D600, 1.6Mhz, 1 GB of RAM and a 7200 RPM 60 GB internal Hard drive. I recently wiped the drive clean and reinstalled XPSP2, Live 5 , Reason 3 and Proteus LX . Pro Tools is installed but rarely used. I am using an MBOX USB as my sound card and I only connect to the internet with this laptop to download drivers then I disable the connection.
I also notice that my CPU is toped out at 100 % With either Ableton or Reason or Reason running as a ReWire to Ableton, when viewing Windows Task Manager. Memory usage seems fine never uses more than 370.
I would like to know what startup services do not need to run . Im technical so do not be afraid to reply technically
Thanks
ProtonicSystems

-
protonic65
- Posts: 2
- Joined: Tue Feb 14, 2006 6:16 pm
- Location: Weehawken, New Jersey USA
-
Contact:
Post
by protonic65 » Tue Feb 14, 2006 7:32 pm
protonic65 wrote:Hello All;
I have a dedicated to music laptop, Dell Latitude D600, 1.6Mhz, 1 GB of RAM and a 7200 RPM 60 GB internal Hard drive. I recently wiped the drive clean and reinstalled XPSP2, Live 5 , Reason 3 and Proteus LX . Pro Tools is installed but rarely used. I am using an MBOX USB as my sound card and I only connect to the internet with this laptop to download drivers then I disable the connection.
I also notice that my CPU (in Task Manger , Not the upper right hand corner indicator) is topped out at 100 % With either Ableton or Reason or Reason running as a ReWire to Ableton, when viewing Windows Task Manager. Memory usage seems fine never uses more than 370.
I would like to know what startup services do not need to run . Im technical so do not be afraid to reply technically
Thanks
ProtonicSystems

-
jezar
- Posts: 6
- Joined: Tue Feb 14, 2006 8:05 pm
Post
by jezar » Tue Feb 14, 2006 8:09 pm
Hello.
protonic65 wrote:What services do not need to be running in Windows XP
The answers that you seek, can be found HERE:
http://www.musicxp.net/tuning_tips.php
Regards,
Jezar.
-
Nod
- Posts: 783
- Joined: Fri Jul 22, 2005 4:18 pm
Post
by Nod » Wed Feb 15, 2006 1:36 pm
Or here:
http://web.archive.org/web/200411280841 ... icecfg.htm
TBH once you've ditched all but the 7-8 automatic services the only way left to improve performance is either to a) get better hardware or alternatively b) do your own custom Windows install. With a default installation XP can clock 250Mb of RAM - with a custom installation you can get that down to 50Mb and a with a really small registry the machine will appear more responsive.
-
Musashi
- Posts: 15
- Joined: Sun Feb 12, 2006 5:04 am
- Location: Pennsylvania
Post
by Musashi » Thu Feb 16, 2006 6:22 am
I've found this site informative and useful:
http://www.processlibrary.com/
Basically, open up your Task Manager, see what processes your system is running, then look them up on this site to see if they're critical to keep around. It's a comfort finding out what some of these cryptically named processes are actually good (or not good) for.
-
djastroboy
- Posts: 616
- Joined: Fri Feb 25, 2005 1:24 pm
- Location: St. Louis
-
Contact:
Post
by djastroboy » Thu Feb 16, 2006 5:47 pm
Nod wrote: with a really small registry the machine will appear more responsive.
That's one thing I've never tried: cleaning the registry.
Does it help to clean an existing default registry after you've used a machine for a while?
What's the best reg cleaner now?
-
kennerb
- Posts: 1464
- Joined: Mon Nov 01, 2004 7:39 pm
- Location: Oregon
-
Contact:
Post
by kennerb » Thu Feb 16, 2006 6:10 pm
djastroboy wrote:Nod wrote: with a really small registry the machine will appear more responsive.
That's one thing I've never tried: cleaning the registry.
Does it help to clean an existing default registry after you've used a machine for a while?
What's the best reg cleaner now?
If it is a machine that you have been running for a while then you will never get it to the minimal again. The only real way to do it is to install a fresh OS, install your needed apps and then make a back up of the registry. You can then use a tool like reg compare to see what gets added and remove left over keys after you do an add/remove programs uninstall. I usually like to keep a ghost image around as it is so much faster than hunting around for all the stuff that gets orphaned after an uninstall. There is no such thing as a clean uninstall.
3ghz Pentium 4 (Prescott), XP Sp2, 1gig Ram, Dual Monitor with Matrox Millenium, MOTU Traveler, Event EZ8 Adat card. Also IBM THinkpad t40 1.6 1 gig ram
-
Nod
- Posts: 783
- Joined: Fri Jul 22, 2005 4:18 pm
Post
by Nod » Fri Feb 17, 2006 12:15 am
kennerb wrote: If it is a machine that you have been running for a while then you will never get it to the minimal again. The only real way to do it is to install a fresh OS, install your needed apps and then make a back up of the registry. You can then use a tool like reg compare to see what gets added and remove left over keys after you do an add/remove programs uninstall. I usually like to keep a ghost image around as it is so much faster than hunting around for all the stuff that gets orphaned after an uninstall. There is no such thing as a clean uninstall.
Agreed - better to do it from Day One of installation and it stays managable. DJastroboy - In terms of regcleaners there's loads out there. Have a look at this:
http://www.ccleaner.com/
As always when messing with the reg - read the instructions, back up
before you start cleaning, at every stage of cleaning and keep proper account of the back up files so you can rebuild if required.
HTH