Firebox : Mic Volume Issues. Definitive Answer?!

Share your favorite Ableton Live tips, tricks, and techniques.
Post Reply
ryansantos
Posts: 25
Joined: Wed Feb 14, 2007 10:17 pm

Firebox : Mic Volume Issues. Definitive Answer?!

Post by ryansantos » Sun Jun 24, 2007 5:40 pm

hello all,

i have a firebox and mac g5 into ableton live 5.
i know there are lots of discussions in regards to when recording vocals/audio via microphone, on these that the input is very low, requiring it to be cranked and often causing distortion.

my question is, it seems as alot of people on this board use a firebox, what is the solution? of everything i've read there hasn't been one definitive thing to do.

thanks!

R.

jamesp
Posts: 277
Joined: Sat Apr 30, 2005 2:16 am

Post by jamesp » Sun Jun 24, 2007 7:23 pm

I record vocals and instruments thru a variety of mics and haven't experienced this problem.

But you could:
Check "+12 dB" in the Firebox control applet?
Get a good mic preamp?
Use a hotter microphone?
Record closer to the mic?
Add a Utility vst to the track and crank the gain?
Boost the gain in the track envelope?
Turn everything else down and crank the Master?

tricil
Posts: 746
Joined: Thu May 26, 2005 10:31 pm
Location: Atlanta, GA
Contact:

Re: Firebox : Mic Volume Issues. Definitive Answer?!

Post by tricil » Mon Jun 25, 2007 3:21 am

ryansantos wrote:hello all,

i have a firebox and mac g5 into ableton live 5.
i know there are lots of discussions in regards to when recording vocals/audio via microphone, on these that the input is very low, requiring it to be cranked and often causing distortion.

my question is, it seems as alot of people on this board use a firebox, what is the solution? of everything i've read there hasn't been one definitive thing to do.

thanks!

R.
open the "firebox mixer" and turn up the faders (i think they default to something like -14dB)
MacBook Pro T7600 / OS X 10.5.7 / Ableton Suite 8.0.2 / Peak Pro XT 6.1.1 / ReMOTE 37SL

spiral
Posts: 743
Joined: Sat Dec 16, 2006 10:34 am
Location: Melbourne, Australia
Contact:

Post by spiral » Mon Jun 25, 2007 4:31 am

i use firebox mixer set to bypass and +12db in the firebox utility

Post Reply