No Sound from My Trigger Finger

confusion-control · Post by **confusion-control** » Mon Feb 04, 2008 10:54 pm

Hmmme, I'm prolly doing something really daft, but I have hooked up my trigger finger exactly like in the manual, but when I hit any pads I don't get a sound. Midi is working; P1 produces a C (midi-ox) and I see the lights flash up the side of the channel I have activated with Impulse. Funny thing is if I press a key on my computer keyboard I get the same lights AND a sound to go with it. I have done a factory reset on the TF. Weirdly some other bits work, like using the F1 slider changes the master volume.

Any tips would be brill.

Cheers,

Poster · Post by **Poster** » Mon Feb 04, 2008 11:14 pm

1st; is the track armed or set to Monitor 'In'?

2nd; the Impulse slots start at C3 upwards..
from memory; I think TF Program 10 starts with C3..

cheers..

leonardrock · Post by **leonardrock** » Mon Feb 04, 2008 11:22 pm

Correct, for Impulse TF must be set to P10

In the track's "Midi From" droplist, select the TF

confusion-control · Post by **confusion-control** » Fri Feb 08, 2008 9:22 pm

guys, sorry for hte late reply - i was away. anyhow - i have set the setting to TF for midi in and out

Cheers anyway