Ecler Nuo4 and the DJ's

A DJ · Post by **A DJ** » Fri Apr 22, 2005 5:06 pm

JohnDP wrote:P.S.I just saw something very interesting...I have a Gigaport AG and when i tried to set each Ableton Live channel to a channel in a hardware mixer like my old Pioneer DJM 600 it didnt work.

Is it true that you can assign each channel separately so that you EQ and use the faders on the hardware mixer and not in Live?

Sorry for the dumbass questions but i am new to Live

JohnDP

yes thats how i use it

three lines out to my DJM 600

get a good sounfcard with 3 or more outputs

and set each channel up on his own output and off u go

torpedo · Post by **torpedo** » Mon Sep 19, 2005 1:42 pm

hi all!,

got a nou4 and i'm very happy, but i'm looking for a deafult setup
for live. there is only one traktor setting on the ecler cd.

Who has it?

greets
flo

robin · Post by **robin** » Mon Sep 19, 2005 3:22 pm

It should be noted that now 5 has come out (since this thread was started....check date) the issue of the pitch fader going the same way as the pitch on a technics and the eq can now also be calibrated to 0 when the knob is all the way around....all from within Live5.

also i should not that although eq4 can be used to replace eq3, eq3 is a lot wilder in it's cuts and is a better device to get filter effects (IMO) than eq4.

i've tried adamjay's suggestions and still use eq3. (note make sure that you don't leave the kill on when controlling the crossover freq....you lose bass).

JohnDP · Post by **JohnDP** » Mon Sep 19, 2005 4:31 pm

can you explain the pitch and the 0 knob thing a bit more in detail...

Thanks, i am very interested

robin · Post by **robin** » Tue Sep 20, 2005 8:00 am

JohnDP wrote:can you explain the pitch and the 0 knob thing a bit more in detail...

Thanks, i am very interested

in 5 when you assign a midi knob or fader (in the usual manner) you can see the range at the bottom of the app. you can also assign negative values so that it reverses the range too. have a play around it should work. my uc33 is setup in 5 so that a full rotation on the knobs is 0dB

JohnDP · Post by **JohnDP** » Tue Sep 20, 2005 12:39 pm

i#ll try that with my UC-33 and i#ll let you know.

Thanks

robin · Post by **robin** » Tue Sep 20, 2005 1:13 pm

JohnDP wrote:i#ll try that with my UC-33 and i#ll let you know.

Thanks

okeedokee

JohnDP · Post by **JohnDP** » Tue Sep 20, 2005 4:00 pm

robin i am sorry but i don't get it.

I am trying

JDP

JohnDP · Post by **JohnDP** » Tue Sep 20, 2005 4:12 pm

i got your point but i cannot get to make it work for my style i.e. having the 0 db at 12 o clock!

Thanks

JDP

Dr. Zoiberg · Post by **Dr. Zoiberg** » Tue Sep 20, 2005 4:39 pm

does the Nuo4 editor work on macs?
if not, does it work with virtual pc?

I've asked Ecler, but they did not reply.

robin · Post by **robin** » Tue Sep 20, 2005 9:42 pm

JohnDP wrote:i got your point but i cannot get to make it work for my style i.e. having the 0 db at 12 o clock!

Thanks

JDP

i very rarely boost with eq, so it works for me ok. yeah it'd be nice to get th 12 oclock 0dB i agree

robin...

JohnDP · Post by **JohnDP** » Wed Sep 21, 2005 7:00 am

its actually impossible as the max parameter of the mid know rotation, the one on the bottom part of the screen can only be set to +6 and thus it CANNOT be set at 12 pm.

Tooo bad...

Ecler Nuo4 and the DJ's

Live setups for Ecler Nuo4

Nuo 4 editor