reassigning drums for the axiom
reassigning drums for the axiom
How do I reassign the notes to play drums on the drum pads with this axiom 25. I just got this thing last month and I am finally getting to tinker with it.
Computer games don't effect kids... If Pacman affected us as kids, we'd all be running around in darkened rooms munching magic pills and listening to repetitive electronic music
http://www.reverbnation.com/blackcatcrossing
http://theblackcatcrossing.com/
http://www.reverbnation.com/blackcatcrossing
http://theblackcatcrossing.com/
I think programming the Axiom pads is like this (mostly from the manual, my own notes in italic):
< Press the pad you want to program
< Press the Advanced button.
< Press the Ctrl Assign key.
< The LCD display will flash the currently assigned controller for the pad.
< Enter 147 for Note on/off (press/release)
< Press the Enter key to confirm.
< Press the Advanced button again.
< Press the Data 1 key.
< The LCD display will flash the currently assigned note for the pad.
< Enter the note number you want the pad to transmit using the numeric keypad.
Note numbers for the Impulse are: 60, 62, 64, 65, 67, 69, 71, 72
< Press the Enter key to confirm.
< Press the pad you want to program
< Press the Advanced button.
< Press the Ctrl Assign key.
< The LCD display will flash the currently assigned controller for the pad.
< Enter 147 for Note on/off (press/release)
< Press the Enter key to confirm.
< Press the Advanced button again.
< Press the Data 1 key.
< The LCD display will flash the currently assigned note for the pad.
< Enter the note number you want the pad to transmit using the numeric keypad.
Note numbers for the Impulse are: 60, 62, 64, 65, 67, 69, 71, 72
< Press the Enter key to confirm.
-
DigitalBoxstep3000
- Posts: 4
- Joined: Mon Feb 19, 2007 7:09 pm
- Location: Atlanta, GA
Thanks for the instructions. I mapped my axiom 25 pads in less than 10 minutes. Now, it's time create custom impulse drum kits.I think programming the Axiom pads is like this (mostly from the manual, my own notes in italic):
< Press the pad you want to program
< Press the Advanced button.
< Press the Ctrl Assign key.
< The LCD display will flash the currently assigned controller for the pad.
< Enter 147 for Note on/off (press/release)
< Press the Enter key to confirm.
< Press the Advanced button again.
< Press the Data 1 key.
< The LCD display will flash the currently assigned note for the pad.
< Enter the note number you want the pad to transmit using the numeric keypad.
Note numbers for the Impulse are: 60, 62, 64, 65, 67, 69, 71, 72
< Press the Enter key to confirm.
can we make this STicky admins , This question comes up every 2 weeks!
Computer games don't effect kids... If Pacman affected us as kids, we'd all be running around in darkened rooms munching magic pills and listening to repetitive electronic music
http://www.reverbnation.com/blackcatcrossing
http://theblackcatcrossing.com/
http://www.reverbnation.com/blackcatcrossing
http://theblackcatcrossing.com/
-
DigitalBoxstep3000
- Posts: 4
- Joined: Mon Feb 19, 2007 7:09 pm
- Location: Atlanta, GA
I 2nd the motion
I agree with this suggestion.can we make this STicky admins , This question comes up every 2 weeks!
_________________
mbenigni wrote:Am I the only one who finds it a little odd that the pads in Impulse don't each have a corresponding learn button? It's 2007, folks - there's no good reason we should be fiddling with these arcane menus on our hardware.
AMEN!
Computer games don't effect kids... If Pacman affected us as kids, we'd all be running around in darkened rooms munching magic pills and listening to repetitive electronic music
http://www.reverbnation.com/blackcatcrossing
http://theblackcatcrossing.com/
http://www.reverbnation.com/blackcatcrossing
http://theblackcatcrossing.com/