Edit Menu-> Audio Problems!
-
glenclayton
- Posts: 82
- Joined: Mon Jan 17, 2005 11:41 pm
- Location: Edinburgh
Edit Menu-> Audio Problems!
I am using live 4.0.4 with a Firewire Audiophile (driver 5.10.0.5032), and whenever I click on the edit menu, there is a audible effect on the playback! Not fatal, but certainly annoying - anyone know of a fix for this?
Misc system info
Athlon 3400 XP
Firewire on Microstar Motherboard
GeForce FX5200 Graphics Card
Misc system info
Athlon 3400 XP
Firewire on Microstar Motherboard
GeForce FX5200 Graphics Card
-
glenclayton
- Posts: 82
- Joined: Mon Jan 17, 2005 11:41 pm
- Location: Edinburgh
-> To answer my own question
If you turn off the XP Menu Fade In special effect (from the Screen->Properties) then this problem disappears!
Hope someone else will find this useful as well...
Hope someone else will find this useful as well...
otherwise, no problems?
glen:
i am having an incredibly hard time with a newly purchased audiophile firewire and live 4.0.4. i have installed both the 5.10.0.5015 and the newest one that you mentioned (5.10.0.5032), neither have worked. so then i REINSTALLED WINDOWS, still no luck. the normal windows noises work fine out of the audiophile, which makes me suspicious, but other programs work as badly as Live (tried recycle and sound forge). i have a p4 with 256mb of ram, seems like that should be adequate, especially with a fresh windows install. currently, i am running the second oldest driver (5.10.0.5015 ) and am honestly afraid to install the newest one. help!!! the best way i can describe the problem is that the sound simply doesn't play. for example, if i double click on a sample (a bass drum WAV for example), nothing happens except the "previewing hihat 08.wav" or whatever is displayed perpetually in the bottom left hand corner of the screen. nothing can be heard, and the cursor cannot be seen to move over the sample (as one would see when Live is functioning properly). as for loading a Live set (.als), the set loads fine, but refuses to play. there is no "not responding" message at that time, indicating that the problem could be processor or software related. anyways, i am very frustrated and would love any help. again, i have a fresh windows xp install with the current service packs, other than that, the computer's basically clean. any suggestions would be appreciated. thanks!
i am having an incredibly hard time with a newly purchased audiophile firewire and live 4.0.4. i have installed both the 5.10.0.5015 and the newest one that you mentioned (5.10.0.5032), neither have worked. so then i REINSTALLED WINDOWS, still no luck. the normal windows noises work fine out of the audiophile, which makes me suspicious, but other programs work as badly as Live (tried recycle and sound forge). i have a p4 with 256mb of ram, seems like that should be adequate, especially with a fresh windows install. currently, i am running the second oldest driver (5.10.0.5015 ) and am honestly afraid to install the newest one. help!!! the best way i can describe the problem is that the sound simply doesn't play. for example, if i double click on a sample (a bass drum WAV for example), nothing happens except the "previewing hihat 08.wav" or whatever is displayed perpetually in the bottom left hand corner of the screen. nothing can be heard, and the cursor cannot be seen to move over the sample (as one would see when Live is functioning properly). as for loading a Live set (.als), the set loads fine, but refuses to play. there is no "not responding" message at that time, indicating that the problem could be processor or software related. anyways, i am very frustrated and would love any help. again, i have a fresh windows xp install with the current service packs, other than that, the computer's basically clean. any suggestions would be appreciated. thanks!
-
glenclayton
- Posts: 82
- Joined: Mon Jan 17, 2005 11:41 pm
- Location: Edinburgh
Other Problems
Everything else seems fine, except there is a problem with the Audiophile headphone cue button and volume knob, which stops working after about 30 mins!
- anyone any clue on this?
- anyone any clue on this?
Re: Other Problems
I had the same problem with the latest drivers. I reverted back to the old 5.10.0.5015 drivers and haven't had any problems since.glenclayton wrote:Everything else seems fine, except there is a problem with the Audiophile headphone cue button and volume knob, which stops working after about 30 mins!
- anyone any clue on this?
-
glenclayton
- Posts: 82
- Joined: Mon Jan 17, 2005 11:41 pm
- Location: Edinburgh
Archived Drivers
I've only just got the box and only have the current driver and the one that came on the CD - do you know where I can download 5015 release?
Cheers
Cheers
-
glenclayton
- Posts: 82
- Joined: Mon Jan 17, 2005 11:41 pm
- Location: Edinburgh
Update
The 5015 drivers seem to have fixed the problem for me.
I contacted M-Audio support who are also looking into it, but weren't aware of the problem. It would help if anyone who has this problem contacts M-Audio (support form on www.m-audio.com) as the more people / information they have the more likely and quicker the fix.
I contacted M-Audio support who are also looking into it, but weren't aware of the problem. It would help if anyone who has this problem contacts M-Audio (support form on www.m-audio.com) as the more people / information they have the more likely and quicker the fix.
-
vince watson
- Posts: 218
- Joined: Sun Oct 31, 2004 8:11 pm
- Location: Amsterdam
- Contact:
ha! m-audio...waste of space and your time...they wont do shit for ya...they will talk a good game though...
i wish you luck..you will need it....
even you pc guys are starting to see audio problems and build problems with m-audio stuff....
not a good sign
i wish you luck..you will need it....
even you pc guys are starting to see audio problems and build problems with m-audio stuff....
not a good sign
Macbook Pro (Early2011) 17" Antiglare Hi Res 2.2, 8gb Ram, RME Multiface Expresscard, Ableton 7.18, Ableton 8.2.1, Snow Leopard 10.6.8
-
glenclayton
- Posts: 82
- Joined: Mon Jan 17, 2005 11:41 pm
- Location: Edinburgh
Follow up
I moved my audiophile from the motherboard firewire (on a MSI 6741 motherboard) to a firewire pci card and that seemed to fix the problem - I can now run with the 5032 drivers and the cue / volume knob don't stop working after a while....