[HELP] M-AUDIO Axiom 49 keyboard

Discuss music production with Ableton Live.
Post Reply
joyrex
Posts: 9
Joined: Wed Aug 09, 2006 1:06 pm

[HELP] M-AUDIO Axiom 49 keyboard

Post by joyrex » Mon Aug 21, 2006 10:43 pm

Hi
I'm using a axiom 49 keyboard on my windows pc, and when
i power it up, sometimes windows tells me "usb devices not recognized", then
i leave it powered until windows recognizes it, but after some usage the keyboard drops again and i lose the control on live.

A signal: the screen flashes, like the device is having a power instability...

PS. sometimes it works like a charm, it's a very random thing.
PPS. i tried everything said on m-audio support.

Thanks in advance.

CWoodOne
Posts: 436
Joined: Sat Jun 25, 2005 2:45 am
Location: Collingswood, NJ

Re: [HELP] M-AUDIO Axiom 49 keyboard

Post by CWoodOne » Tue Aug 22, 2006 3:33 am

joyrex wrote:Hi
I'm using a axiom 49 keyboard on my windows pc, and when
i power it up, sometimes windows tells me "usb devices not recognized", then
i leave it powered until windows recognizes it, but after some usage the keyboard drops again and i lose the control on live.

A signal: the screen flashes, like the device is having a power instability...

PS. sometimes it works like a charm, it's a very random thing.
PPS. i tried everything said on m-audio support.

Thanks in advance.
Is there enough power going to your USB devices? That's all I can think of... maybe hookup a wall wart to power the keyboard or use a powered usb hub.

jamester
Posts: 1272
Joined: Sun Jun 04, 2006 7:43 am
Location: Baltimore, MD

Post by jamester » Tue Aug 22, 2006 3:39 am

It definitely could be a power issue. I had bad luck with a usb hub initially, even with it plugged in (powered hub). Once I plugged it directly into the computer, no problem.

However while it seems to be working fine, I have also started getting the blinking screen. It even went blank-blue on me once! Fiddling with the usb cable seems to help, but it might just be my imagination. We'll see... Other than that and the pads not retaining their new numbers (for Impulse), it seems to be working correctly.

But it's always something with M-Audio stuff.... :roll:
Purrrfect Audio PC by Jim Roseberry
Edirol UA-1000, Korg PadKontrol, Dynaudio BM 5A's
REAPER, Live, Sound Forge

DeadlyKungFu
Posts: 3603
Joined: Tue Aug 09, 2005 8:26 pm

Post by DeadlyKungFu » Tue Aug 22, 2006 3:50 am

Try a different USB cable. If jiggling the jack makes a difference the jack may be loose/broken, crack it open and add some solder to the connection.

joyrex
Posts: 9
Joined: Wed Aug 09, 2006 1:06 pm

Post by joyrex » Tue Aug 22, 2006 8:41 pm

Thank you for your answers guys, i'm getting a power supply to see if things
get better.

hehe really, it's always something with M-AUDIO stuff :roll:

Post Reply